Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One Instrument
Item number 64-402113

Granite Parallel Blocks, Pairs, Double-Sided, Flatness and Parallelism Measuring Surfaces per DIN 874, Material Granite, Straight Chamfered Edges, Supplied in Aluminum Case with Declaration of Conformity, Class 00, Flatness/Parallelism ±2 µm, Dimensions 250×40×25 mm, Weight per Pair 1.6 kg

1.848 DKK

In stock

Granite parallels 250x40x25mm are precision tools for the workshop industry, manufactured from high-quality granite. They offer exceptional flatness, dimensional stability, and wear resistance. Ideal for alignment, inspection, and measurement in workshop environments where accuracy is critical. Corrosion-resistant and durable even with prolonged use.

Request a quote 64-402113

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

This granite parallel pair is the right tool when you need a flat, parallel reference that does not change with temperature, does not rust, and does not pick up the small impact marks that a steel parallel pair inevitably acquires after a few years on the workbench. Granite has a thermal expansion coefficient that is approximately one-third that of steel, so the instrument maintains its calibration through the temperature fluctuations that would push a steel pair out of tolerance.

Each pair is finely machined to Class 00 according to DIN 874, with ground and certified measuring surfaces for flatness, parallelism, and straightness. The double-sided variant provides two opposing working surfaces, with straight chamfered edges so that the parallels sit flush against a fixture or workpiece without rocking. Delivered in an aluminum case together with a declaration of conformity — ready for the QA cabinet the same day.

Use them as a straight-line reference for inspection setups, as packing under sine bars and angle plates, or as a height reference under an indicator stand. The polished granite is gentle on workpieces — no scratches on softer alloys — and the dimensional stability makes the pair suitable both for verification work and as an underlying reference in fixture builds.

Features

  • Material: granite — thermally stable, non-magnetic, corrosion-resistant
  • Class 00 according to DIN 874
  • Double-sided working surfaces, straight chamfered edges
  • Ground, flat, parallel, and straight measuring surfaces
  • Delivered in an aluminum case with a declaration of conformity
  • Suitable for inspection benches, fixture references, and CMM setups

Specifications

Material Granite
Standard DIN 874
Class 00
Working surfaces Double-sided
Dimensions 250 × 40 × 25 mm
Accuracy ±2 µm
Weight 1.6 kg/pair
Item number 64-402113
Additional information
Weight 2,033 kg
Specification

This granite parallel pair is the right tool when you need a flat, parallel reference that does not change with temperature, does not rust, and does not pick up the small impact marks that a steel parallel pair inevitably acquires after a few years on the workbench. Granite has a thermal expansion coefficient that is approximately one-third that of steel, so the instrument maintains its calibration through the temperature fluctuations that would push a steel pair out of tolerance.

Each pair is finely machined to Class 00 according to DIN 874, with ground and certified measuring surfaces for flatness, parallelism, and straightness. The double-sided variant provides two opposing working surfaces, with straight chamfered edges so that the parallels sit flush against a fixture or workpiece without rocking. Delivered in an aluminum case together with a declaration of conformity — ready for the QA cabinet the same day.

Use them as a straight-line reference for inspection setups, as packing under sine bars and angle plates, or as a height reference under an indicator stand. The polished granite is gentle on workpieces — no scratches on softer alloys — and the dimensional stability makes the pair suitable both for verification work and as an underlying reference in fixture builds.

Features

  • Material: granite — thermally stable, non-magnetic, corrosion-resistant
  • Class 00 according to DIN 874
  • Double-sided working surfaces, straight chamfered edges
  • Ground, flat, parallel, and straight measuring surfaces
  • Delivered in an aluminum case with a declaration of conformity
  • Suitable for inspection benches, fixture references, and CMM setups

Specifications

Material Granite
Standard DIN 874
Class 00
Working surfaces Double-sided
Dimensions 250 × 40 × 25 mm
Accuracy ±2 µm
Weight 1.6 kg/pair
Item number 64-402113
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *