Granite parallels in pairs, four-sided, flatness and parallelism of measuring surfaces per DIN 874, material granite, straight chamfered edges, supplied in aluminum case with declaration of conformity, class 0, flatness/parallelism ±4 µm, dimensions 250×40×25 mm, weight per pair 1.6 kg
1.940 DKK
Granite parallel with dimensions 250x40x25 mm for precision measurement. Manufactured from high-quality granite for exact surface roughness and precision. Ideal for workshops and production environments where accurate measurements and fine adjustments are critical. Provides stable support during inspections and quality controls.
Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%
- Gratis fragt over 3.000 kr. ekskl. moms
- Hand-held and bench measuring equipment from Mahr
Description
This granite parallel pair is the right tool when you need a flat, parallel reference that does not change with temperature, does not rust, and does not sustain the minor impact marks that a steel parallel pair inevitably acquires after a few years on the workbench. Granite has a thermal expansion coefficient that is approximately one-third that of steel, so the instrument maintains its calibration through the temperature fluctuations that would push a steel pair out of tolerance.
Each pair is precision finished to Class 0 according to DIN 874, with ground and certified measuring surfaces for flatness, parallelism, and straightness. The 4-sided variant provides all four working surfaces, with straight chamfered edges so that the parallels sit flush against a fixture or workpiece without rocking. Delivered in an aluminum case together with the declaration of conformity — ready for the QA cabinet the same day.
Use them as a straight-line reference for inspection setups, as packing under sine bars and angle plates, or as a height reference under an indicator stand. The polished granite is gentle on workpieces — no scratches on softer alloys — and the dimensional stability makes the pair suitable both for verification work and as an underlying reference in fixture builds.
Features
- Material: granite — thermally stable, non-magnetic, corrosion-resistant
- Class 0 according to DIN 874
- 4-sided working surfaces, straight chamfered edges
- Ground, flat, parallel, and straight measuring surfaces
- Delivered in aluminum case with declaration of conformity
- Suitable for inspection benches, fixture references, and CMM setups
Specifications
| Material | Granite |
|---|---|
| Standard | DIN 874 |
| Class | 0 |
| Working surfaces | 4-sided |
| Dimensions | 250 × 40 × 25 mm |
| Accuracy | ±4 µm |
| Weight | 1.6 kg/pair |
| Article number | 64-402101 |
Additional information
| Weight | 2,172 kg |
|---|
Specification
This granite parallel pair is the right tool when you need a flat, parallel reference that does not change with temperature, does not rust, and does not sustain the minor impact marks that a steel parallel pair inevitably acquires after a few years on the workbench. Granite has a thermal expansion coefficient that is approximately one-third that of steel, so the instrument maintains its calibration through the temperature fluctuations that would push a steel pair out of tolerance.
Each pair is precision finished to Class 0 according to DIN 874, with ground and certified measuring surfaces for flatness, parallelism, and straightness. The 4-sided variant provides all four working surfaces, with straight chamfered edges so that the parallels sit flush against a fixture or workpiece without rocking. Delivered in an aluminum case together with the declaration of conformity — ready for the QA cabinet the same day.
Use them as a straight-line reference for inspection setups, as packing under sine bars and angle plates, or as a height reference under an indicator stand. The polished granite is gentle on workpieces — no scratches on softer alloys — and the dimensional stability makes the pair suitable both for verification work and as an underlying reference in fixture builds.
Features
- Material: granite — thermally stable, non-magnetic, corrosion-resistant
- Class 0 according to DIN 874
- 4-sided working surfaces, straight chamfered edges
- Ground, flat, parallel, and straight measuring surfaces
- Delivered in aluminum case with declaration of conformity
- Suitable for inspection benches, fixture references, and CMM setups
Specifications
| Material | Granite |
|---|---|
| Standard | DIN 874 |
| Class | 0 |
| Working surfaces | 4-sided |
| Dimensions | 250 × 40 × 25 mm |
| Accuracy | ±4 µm |
| Weight | 1.6 kg/pair |
| Article number | 64-402101 |

There are no reviews yet.