Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference Furnace

See the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavities

Published 20 November 2026 at 04:30

Water is standing in the floor drain, and nobody can say whether there is a blockage, a crack or a collapse somewhere in the line. Guesswork often ends with digging or breaking up the floor in the wrong place. That is expensive, and the problem is still there afterwards. In practice, it is almost always cheaper to see what is going on before you open anything up.

HD videoskop Wireless VVS kit med 30m Probe

What it is

The HDV650W-30G is a videoscope with a 30-meter-long waterproof camera probe on a reel. The probe has a flexible fiberglass core and a 25 mm camera head with a 60-degree field of view and a long depth of field. The head has 12 built-in LEDs, so dark pipes and cavities are illuminated. The image is shown on a wireless handset with a 5.7-inch color screen in VGA resolution (640 x 480). This is also where you adjust the brightness. The handset is built in an oil- and chemical-resistant housing with an IP67 rating.

What problems it solves

The instrument replaces guesswork with an image. You can see whether there are deposits, foreign objects, root intrusion, misaligned joints or a broken line. You can also see where along the line the fault is located. Images and video are saved to an SD card, with room for more than 15,000 images or up to four hours of video recording with voice recording. This means you can add comments as you go and later show the customer, the contractor or the quality department what you have found.

When and why it is used

It is used when access is limited and when an intervention is more expensive than the inspection itself. Typically it is used before a repair, when taking over an installation, or as a periodic check of systems that cannot be dismantled without stopping operations.

Three practical situations

Plumbing and drainage: With a blocked or slow drain line, the probe can be fed in through a manhole or cleanout. You can see whether the cause is grease, roots or a damaged joint, and you can limit the excavation to the spot where it is actually needed.

Industrial maintenance: Process pipes, ventilation ducts and cavities in machine housings can be inspected without dismantling. The images can go directly into the maintenance report and be compared from one inspection to the next.

Food production and quality: Where pipes and ducts are difficult to access, a visual check can document that there is no residual material or foreign objects. The recording can be saved as an appendix to the in-house quality control records.

Note that the probe has a diameter of 25 mm. It is therefore intended for pipes and cavities of a certain size and not for the very smallest openings.

The economics

The gain lies in what you avoid: unnecessary excavation, repeated repair attempts and production stops to dismantle equipment. Then there is the documentation. A recorded run with voice comments is a strong argument towards insurers, clients or suppliers, and it often saves the discussion about what was actually found. A workshop or service company that regularly faces hidden faults will typically be able to earn the equipment back within a few jobs.

The kit is delivered complete with handset, camera probe, SD card, rechargeable battery, AC adapter, USB and AV cables and a hard carrying case, so it is ready for use from day one. See all data and specifications on the product page: HD videoscope Wireless plumbing kit with 30 m probe.

Read more

More news

All news