Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One Instrument
Item number 64-402104

Granite parallels in pairs, two-sided, flatness and parallelism measuring surfaces per DIN 874, material granite, straight chamfered edges, supplied in aluminium case with declaration of conformity, class 0, flatness/parallelism ±3 µm, dimensions 160×25×16 mm, weight per pair 0.5 kg

1.287 DKK

In stock

Precision-manufactured granite parallels with dimensions of 160x25x16mm. These robust parallels offer exceptional stability and resistance to wear. Perfect for precise setup and clamping during measurement, inspection, and quality control tasks. The natural properties of granite ensure long-term precision and reliability in workshop environments.

Request a quote 64-402104

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

This granite parallel pair is the right tool when you need a flat, parallel reference that does not change with temperature, does not rust, and does not sustain the small impact marks that a steel parallel pair inevitably acquires after a few years on the workbench. Granite has a thermal expansion coefficient that is approximately one-third that of steel, so the instrument maintains its calibration through the temperature fluctuations that would push a steel pair out of tolerance.

Each pair is precision finished to Class 0 according to DIN 874, with ground and certified measuring surfaces for flatness, parallelism, and straightness. The 2-sided variant provides two opposing working surfaces, with straight chamfered edges so that the parallels sit flush against a fixture or workpiece without rocking. Delivered in an aluminum case together with a declaration of conformity — ready for the QA cabinet the same day.

Use them as a straight-line reference for inspection setups, as packing under sine bars and angle plates, or as a height reference under an indicator stand. The polished granite is gentle on workpieces — no scratches on softer alloys — and the dimensional stability makes the pair suitable both for verification work and as an underlying reference in fixture builds.

Features

  • Material: granite — thermally stable, non-magnetic, corrosion-resistant
  • Class 0 according to DIN 874
  • 2-sided working surfaces, straight chamfered edges
  • Ground, flat, parallel, and straight measuring surfaces
  • Delivered in an aluminum case with a declaration of conformity
  • Suitable for inspection benches, fixture references, and CMM setups

Specifications

Material Granite
Standard DIN 874
Class 0
Working surfaces 2-sided
Dimensions 160 × 25 × 16 mm
Accuracy ±3 µm
Weight 0.5 kg/pair
Item number 64-402104
Additional information
Weight 0,577 kg
Specification

This granite parallel pair is the right tool when you need a flat, parallel reference that does not change with temperature, does not rust, and does not sustain the small impact marks that a steel parallel pair inevitably acquires after a few years on the workbench. Granite has a thermal expansion coefficient that is approximately one-third that of steel, so the instrument maintains its calibration through the temperature fluctuations that would push a steel pair out of tolerance.

Each pair is precision finished to Class 0 according to DIN 874, with ground and certified measuring surfaces for flatness, parallelism, and straightness. The 2-sided variant provides two opposing working surfaces, with straight chamfered edges so that the parallels sit flush against a fixture or workpiece without rocking. Delivered in an aluminum case together with a declaration of conformity — ready for the QA cabinet the same day.

Use them as a straight-line reference for inspection setups, as packing under sine bars and angle plates, or as a height reference under an indicator stand. The polished granite is gentle on workpieces — no scratches on softer alloys — and the dimensional stability makes the pair suitable both for verification work and as an underlying reference in fixture builds.

Features

  • Material: granite — thermally stable, non-magnetic, corrosion-resistant
  • Class 0 according to DIN 874
  • 2-sided working surfaces, straight chamfered edges
  • Ground, flat, parallel, and straight measuring surfaces
  • Delivered in an aluminum case with a declaration of conformity
  • Suitable for inspection benches, fixture references, and CMM setups

Specifications

Material Granite
Standard DIN 874
Class 0
Working surfaces 2-sided
Dimensions 160 × 25 × 16 mm
Accuracy ±3 µm
Weight 0.5 kg/pair
Item number 64-402104
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *