Published 20 November 2026 at 17:33
You open the refrigerator in a laboratory or a large-kitchen department, and the display shows 9 °C. The door has been open for half a minute during a delivery. Is the content now too warm, or is it only the air that has fluctuated? A thermometer that merely measures the air cannot answer that, and this is exactly where many cold-storage checks become uncertain.
A thermometer that measures the way the product behaves
The ThermaGuard Pharm 101 is a digital refrigerator and freezer thermometer developed for monitoring vaccines, medicines and food. It has two sensors: an internal one that shows the room temperature, and an external thermistor probe on two metres of PVC cable. The probe sits in a sealed bottle, which is filled with a glycol solution (a 50 ml bottle is included). The glycol dampens the rapid fluctuations, so the reading is closer to the temperature of the product itself than to a snapshot of the air.
Which problems it solves
First, you can distinguish between a brief door opening and a genuine temperature deviation. The display shows the current temperature as well as the recorded max. and min. at the same time, so you can see what happened while you weren’t watching. Second, you can set high and low alarm limits, after which the display flashes and an alarm sounds if a limit is exceeded. Third, the thermometer has a CalCheck function at 0.0 °C (±0.1 °C), so you can check at any time that it is still reading correctly. The thermometer complies with EN 13485, and the delivery includes a UKAS calibration certificate with deviations at -18 and 0 °C.
Where it is used
Pharmacy and clinic: Vaccines and medicines have fixed temperature requirements. Here the product temperature is the relevant quantity, and the certificate and the max./min. reading provide a basis for documentation during inspections.
Food production and large kitchens: In connection with self-monitoring and HACCP, cold rooms and refrigerators must be able to show that the cold chain has been maintained. The alarm catches a door that has not been closed properly before the goods are lost.
Laboratory: Samples, reagents and control materials are often stored cold. The external probe can sit inside the refrigerator while you read the display from outside without opening the door.
Why it pays off
The cost of a mistake is rarely the thermometer itself, but what is in the cabinet. If a vaccine delivery or a batch of food is discarded because of an uncertain temperature history, the loss far exceeds the price of a thermometer. Then there is the time: with a check function and a calibration certificate, you don’t have to send the equipment for verification every time you are in doubt, and you avoid discarding goods purely out of caution because you cannot document what happened.
If you need to monitor two product zones, there is the sister model ThermaGuard 102 with two external probes. But if you want to track both the product’s temperature and the room’s, the 101 model is the right choice.