Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference Furnace
Item number 64-906747

Set of measuring inserts for UN/UNC/UNF threads, 60° flank angle, 64-3.5 threads per inch

1.067 DKK

In stock

Practical set of measuring inserts designed for precision work. These components fit perfectly into standardized systems with a diameter of 3.5 mm. The inserts offer an exact fit and high quality for consistent performance in technical applications. Ideal for professional use where accuracy and reliability are critical.

Request a quote 64-906747

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Other models in the series 16

Description

Measuring insert set for UN, UNC and UNF threads, 60° flank angle (Set 64-3.5) is a thread micrometer accessory — either a setting ring (master gauge for zero-calibration of thread micrometers) or a measuring insert (the contact surface of the micrometer itself matched to the thread form). Both are essential for traceable thread pitch measurement on screws and nuts.

Setting rings are pre-cut threads at known pitch diameters — place it in the micrometer, zero it, then measure the workpiece thread. Measuring inserts have V-shaped or pointed contact surfaces that fit into the thread profile so the micrometer reads the pitch diameter directly. Hardened, ground surfaces; matched to specific thread pitch values.

Usage: for setting rings, place in the micrometer, read the zero value, adjust the micrometer if necessary; for measuring inserts, swap inserts to match the thread pitch and measure over the thread pitch line. Both require matching to a specific thread pitch and tolerance class.

Common applications: calibration of thread micrometers in calibration laboratories, traceable thread QC in manufacturing workshops, master-gauge-based zero verification chains, and educational applications for thread form instruction.

Features

  • Measuring insert set for UN, UNC and UNF threads, 60° flank angle (Set 64-3.5)
  • Hardened, ground reference surfaces for repeatable measurement
  • Schut build quality
  • Suitable for workshop QC, calibration labs and bench measurement applications
  • ECONOMY LINE series

Specifications

Manufacturer Schut
Series ECONOMY LINE
Type Screw thread micrometers – Measuring inserts
Article number 64-906747

Compatible accessories

Compatible accessories: Schut setting rings and reference standards for periodic verification of accuracy at known dimensions; calibration certificate (ISO 17025) at first delivery and periodic verification — typically 12-month interval for production floors, 6-month for high-volume chains; Schut protective cases and bench storage; Schut spare parts and consumables where applicable.

Additional information
Weight 0,047 kg
Threads Per Inch

Set 64-3.5

Clamping Shaft

ø 5 mm

Specification

Measuring insert set for UN, UNC and UNF threads, 60° flank angle (Set 64-3.5) is a thread micrometer accessory — either a setting ring (master gauge for zero-calibration of thread micrometers) or a measuring insert (the contact surface of the micrometer itself matched to the thread form). Both are essential for traceable thread pitch measurement on screws and nuts.

Setting rings are pre-cut threads at known pitch diameters — place it in the micrometer, zero it, then measure the workpiece thread. Measuring inserts have V-shaped or pointed contact surfaces that fit into the thread profile so the micrometer reads the pitch diameter directly. Hardened, ground surfaces; matched to specific thread pitch values.

Usage: for setting rings, place in the micrometer, read the zero value, adjust the micrometer if necessary; for measuring inserts, swap inserts to match the thread pitch and measure over the thread pitch line. Both require matching to a specific thread pitch and tolerance class.

Common applications: calibration of thread micrometers in calibration laboratories, traceable thread QC in manufacturing workshops, master-gauge-based zero verification chains, and educational applications for thread form instruction.

Features

  • Measuring insert set for UN, UNC and UNF threads, 60° flank angle (Set 64-3.5)
  • Hardened, ground reference surfaces for repeatable measurement
  • Schut build quality
  • Suitable for workshop QC, calibration labs and bench measurement applications
  • ECONOMY LINE series

Specifications

Manufacturer Schut
Series ECONOMY LINE
Type Screw thread micrometers – Measuring inserts
Article number 64-906747

Compatible accessories

Compatible accessories: Schut setting rings and reference standards for periodic verification of accuracy at known dimensions; calibration certificate (ISO 17025) at first delivery and periodic verification — typically 12-month interval for production floors, 6-month for high-volume chains; Schut protective cases and bench storage; Schut spare parts and consumables where applicable.

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *