Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the thermometer reads 3.0 °C but the product is at 5.5 °C: how to check your thermocouples at three pointsThe temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the thermometer reads 3.0 °C but the product is at 5.5 °C: how to check your thermocouples at three pointsThe temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handle
Item number 64-402102

Granite parallels in pairs, four-sided, flatness and parallelism of measuring surfaces in accordance with DIN 874, material granite, straight chamfered edges, supplied in aluminium case with declaration of conformity, class 0, flatness/parallelism ±8 µm, dimensions 400×63×40 mm, weight per pair 6.5 kg

2.988 DKK

In stock

Precision granite parallel block in the dimension 400x63x40mm. Manufactured from high-quality granite for optimal stability and accuracy in measurement work. Perfect for workshops and laboratories where precise measurements are required. The smooth and wear-resistant surface guarantees long-lasting precision and reliability.

Request a quote 64-402102

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

This granite parallel pair is the right tool when you need a flat, parallel reference that does not change with temperature, does not rust, and does not sustain the small impact marks that a steel parallel pair inevitably acquires after a few years on the workbench. Granite has a thermal expansion coefficient that is approximately one-third that of steel, so the instrument maintains its calibration through the temperature fluctuations that would push a steel pair out of tolerance.

Each pair is precision finished to Class 0 according to DIN 874, with ground and certified measuring surfaces for flatness, parallelism, and straightness. The 4-sided variant provides all four working surfaces, with straight chamfered edges so that the parallels sit flush against a fixture or workpiece without rocking. Delivered in an aluminum case together with the certificate of conformity — ready for the QA cabinet the same day.

Use them as a straight-line reference for inspection setups, as packing under sine bars and angle plates, or as a height reference under an indicator stand. The polished granite is gentle on workpieces — no scratches on softer alloys — and the dimensional stability makes the pair suitable both for verification work and as an underlying reference in fixture builds.

Features

  • Material: granite — thermally stable, non-magnetic, corrosion-resistant
  • Class 0 according to DIN 874
  • 4-sided working surfaces, straight chamfered edges
  • Ground, flat, parallel, and straight measuring surfaces
  • Delivered in aluminum case with certificate of conformity
  • Suitable for inspection benches, fixture references, and CMM setups

Specifications

Material Granite
Standard DIN 874
Class 0
Working surfaces 4-sided
Dimensions 400 × 63 × 40 mm
Accuracy ±8 µm
Weight 6.5 kg/pair
Item number 64-402102
Additional information
Weight 7,265 kg
Specification

This granite parallel pair is the right tool when you need a flat, parallel reference that does not change with temperature, does not rust, and does not sustain the small impact marks that a steel parallel pair inevitably acquires after a few years on the workbench. Granite has a thermal expansion coefficient that is approximately one-third that of steel, so the instrument maintains its calibration through the temperature fluctuations that would push a steel pair out of tolerance.

Each pair is precision finished to Class 0 according to DIN 874, with ground and certified measuring surfaces for flatness, parallelism, and straightness. The 4-sided variant provides all four working surfaces, with straight chamfered edges so that the parallels sit flush against a fixture or workpiece without rocking. Delivered in an aluminum case together with the certificate of conformity — ready for the QA cabinet the same day.

Use them as a straight-line reference for inspection setups, as packing under sine bars and angle plates, or as a height reference under an indicator stand. The polished granite is gentle on workpieces — no scratches on softer alloys — and the dimensional stability makes the pair suitable both for verification work and as an underlying reference in fixture builds.

Features

  • Material: granite — thermally stable, non-magnetic, corrosion-resistant
  • Class 0 according to DIN 874
  • 4-sided working surfaces, straight chamfered edges
  • Ground, flat, parallel, and straight measuring surfaces
  • Delivered in aluminum case with certificate of conformity
  • Suitable for inspection benches, fixture references, and CMM setups

Specifications

Material Granite
Standard DIN 874
Class 0
Working surfaces 4-sided
Dimensions 400 × 63 × 40 mm
Accuracy ±8 µm
Weight 6.5 kg/pair
Item number 64-402102
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *