Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolutionWhen two operators measure the same hole and get two different numbers: how three measuring points remove the uncertaintyVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolutionWhen two operators measure the same hole and get two different numbers: how three measuring points remove the uncertainty
Item number 56-AT-76K1

TandD Wall Mount for 56-RTR-576 & TR-76Ui

296 DKK

In stock

TandD Wall Mount for 56-RTR-576 & TR-76Ui

Request a quote 56-AT-76K1

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category: , , , , , , , ,

Other models in the series 16

Description

Mounting bracket — secures the TandD logger or base unit to a wall, panel, or structural support. Made of polycarbonate or aluminum, depending on the model. Each kit includes mounting screws and double-sided tape for quick installation.

Compatible with

  • Loggers: 56-RTR-574, 56-RTR-574-S, 56-RTR-576, 56-RTR-576-S, 56-TR-71NW, 56-TR-72NW, 56-TR-72NW-S, 56-TR-73U, 56-TR-74UI, 56-TR-74UI-S, 56-TR-75NW, 56-TR-76UI, 56-TR-76UI-S, 56-TR71A2, 56-TR72A2, 56-TR72A2-S, 56-TR75A2
Compatible units
Note : Cracking may occur if polycarbonate is exposed to strong impact at temperatures of -30 °C or lower
Note Cracking may occur if polycarbonate is exposed to strong impact at temperatures of -30 °C or lower
Additional information
Product Type

Accessories

PDF (1)