Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One Instrument
Item number 64-907236

Measuring instrument with analog dial indicator for internal measurement, 160-250 mm

1.094 DKK

In stock

Precision instrument for exact internal measurement of dimensions between 160-250 mm. Designed for professional use in the workshop industry with high accuracy and reliability. Ideal for quality control and manufacturing where millimeter precision is crucial for the final result.

Request a quote 64-907236

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Internal measuring instrument, measuring range 160 – 250 mm is a two-point internal hole inspection instrument from the ECONOMY LINE series — used for measuring the diameters and form deviations of cylindrical holes, such as roundness and parallelism. The instrument is supplied with a measuring head and handle; the operator pairs it with a setting ring and a dial indicator (sold separately) to read hole deviations directly.

The two-point measuring principle uses two opposing contacts — a fixed reference and a spring-loaded probe — that ride against the hole wall. As the head is passed through the hole, diameter variations, ovality, taper, or “barrelling” appear as dial indicator rotation at the handle.

Usage: select a setting ring at the nominal hole diameter; zero the dial indicator with the head seated in the ring; pass the head through the hole and note the dial indicator rotation at multiple positions. The deviation indicates ovality (one rotation at one position), taper (axial variation), and “barrelling”.

Features

  • Two-point internal measuring instrument
  • Measuring range 160 – 250 mm
  • Two-point opposing-contact measuring principle
  • Compatible with standard dial indicator (sold separately)
  • Setting ring zeroing
  • Hardened, ground measuring head
  • ECONOMY LINE build quality

Specifications

Type Two-point internal measuring instrument
Series ECONOMY LINE
Measuring range 160 – 250 mm
Measuring principle Two-point opposing-contact, dial indicator reading
Material Hardened steel, dimensionally stable
Article number 64-907236

Compatible accessories

Dial indicator (matched to desired resolution — typically 0.001 or 0.01 mm) is required for use, sold separately. Setting rings within 160 – 250 mm for periodic zero verification. Calibration certificate (ISO 17025). Protective case. Spare measuring tips.

Additional information
Weight 2,883 kg
Specification

Internal measuring instrument, measuring range 160 – 250 mm is a two-point internal hole inspection instrument from the ECONOMY LINE series — used for measuring the diameters and form deviations of cylindrical holes, such as roundness and parallelism. The instrument is supplied with a measuring head and handle; the operator pairs it with a setting ring and a dial indicator (sold separately) to read hole deviations directly.

The two-point measuring principle uses two opposing contacts — a fixed reference and a spring-loaded probe — that ride against the hole wall. As the head is passed through the hole, diameter variations, ovality, taper, or “barrelling” appear as dial indicator rotation at the handle.

Usage: select a setting ring at the nominal hole diameter; zero the dial indicator with the head seated in the ring; pass the head through the hole and note the dial indicator rotation at multiple positions. The deviation indicates ovality (one rotation at one position), taper (axial variation), and “barrelling”.

Features

  • Two-point internal measuring instrument
  • Measuring range 160 – 250 mm
  • Two-point opposing-contact measuring principle
  • Compatible with standard dial indicator (sold separately)
  • Setting ring zeroing
  • Hardened, ground measuring head
  • ECONOMY LINE build quality

Specifications

Type Two-point internal measuring instrument
Series ECONOMY LINE
Measuring range 160 – 250 mm
Measuring principle Two-point opposing-contact, dial indicator reading
Material Hardened steel, dimensionally stable
Article number 64-907236

Compatible accessories

Dial indicator (matched to desired resolution — typically 0.001 or 0.01 mm) is required for use, sold separately. Setting rings within 160 – 250 mm for periodic zero verification. Calibration certificate (ISO 17025). Protective case. Spare measuring tips.

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *