Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One Instrument
Item number 64-907235

Measuring instrument with analog dial indicator for internal measurement, 50-160 mm

818 DKK

In stock

A precise measuring instrument for internal measurements in the range of 50-160 mm. This tool is perfect for accurate dimensional measurement in workshops and production environments. Ideal for quality control and technical precision work where exact internal measurements are required.

Request a quote 64-907235

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Internal measuring instrument, measuring range 50 – 160 mm is a two-point internal hole inspection instrument from the ECONOMY LINE series — used for measuring the diameters of cylindrical holes and form deviations such as roundness and parallelism. The instrument is supplied with a measuring head and handle; the operator pairs it with a setting ring and a dial indicator (sold separately) to read hole deviation directly.

The two-point measuring principle uses two opposing contacts — one fixed reference, one spring-loaded probe — that ride against the hole wall. As the head is passed through the hole, diameter variations, ovality, taper, or “barrelling” appear as dial indicator rotation at the handle.

Usage: select a setting ring at the nominal hole diameter; zero the dial indicator with the head seated in the ring; pass the head through the hole and note the dial indicator rotation at several positions. The deviation indicates ovality (one rotation at one position), taper (axial variation), and “barrelling”.

Features

  • Two-point internal measuring instrument
  • Measuring range 50 – 160 mm
  • Two-point opposing contact measuring principle
  • Compatible with standard dial indicator (sold separately)
  • Setting ring zeroing
  • Hardened, ground measuring head
  • ECONOMY LINE build quality

Specifications

Type Two-point internal measuring instrument
Series ECONOMY LINE
Measuring range 50 – 160 mm
Measuring principle Two-point opposing contact, dial indicator reading
Material Hardened steel, dimensionally stable
Article number 64-907235

Compatible accessories

Dial indicator (matched to desired resolution — typically 0.001 or 0.01 mm) is required for use, sold separately. Setting rings within 50 – 160 mm for periodic zero verification. Calibration certificate (ISO 17025). Protective case. Spare measuring tips.

Additional information
Weight 1,087 kg
Specification

Internal measuring instrument, measuring range 50 – 160 mm is a two-point internal hole inspection instrument from the ECONOMY LINE series — used for measuring the diameters of cylindrical holes and form deviations such as roundness and parallelism. The instrument is supplied with a measuring head and handle; the operator pairs it with a setting ring and a dial indicator (sold separately) to read hole deviation directly.

The two-point measuring principle uses two opposing contacts — one fixed reference, one spring-loaded probe — that ride against the hole wall. As the head is passed through the hole, diameter variations, ovality, taper, or “barrelling” appear as dial indicator rotation at the handle.

Usage: select a setting ring at the nominal hole diameter; zero the dial indicator with the head seated in the ring; pass the head through the hole and note the dial indicator rotation at several positions. The deviation indicates ovality (one rotation at one position), taper (axial variation), and “barrelling”.

Features

  • Two-point internal measuring instrument
  • Measuring range 50 – 160 mm
  • Two-point opposing contact measuring principle
  • Compatible with standard dial indicator (sold separately)
  • Setting ring zeroing
  • Hardened, ground measuring head
  • ECONOMY LINE build quality

Specifications

Type Two-point internal measuring instrument
Series ECONOMY LINE
Measuring range 50 – 160 mm
Measuring principle Two-point opposing contact, dial indicator reading
Material Hardened steel, dimensionally stable
Article number 64-907235

Compatible accessories

Dial indicator (matched to desired resolution — typically 0.001 or 0.01 mm) is required for use, sold separately. Setting rings within 50 – 160 mm for periodic zero verification. Calibration certificate (ISO 17025). Protective case. Spare measuring tips.

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *