Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference Furnace
Item number 64-402002

Granite measuring plate, dimensions 400x400x70 mm, weight 41 kg, accuracy according to DIN 876/1

1.950 DKK

In stock

Precision-engineered granite surface plate measuring 400×400 mm. The flat surface is ideal for measuring, calibrating, and inspecting mechanical components. The fine finish of the surface ensures high accuracy and reliability for quality control in workshops or laboratories. Suitable for industrial applications where precision is critical.

Request a quote 64-402002

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

The 400×400×70 mm granite measuring table, DIN 876/1, is the fundamental reference for any precision inspection bench — the dead-flat surface against which everything else is measured. DIN 876/1 is the inspection quality tolerance class: flatness within a few micrometers across the entire table, with the ground working surface allowing gauge blocks to be wrung directly against it for primary length references.

Granite is the right material for a measuring table for three reasons: thermal stability (approximately 1/3 of steel’s coefficient of expansion, so the table does not drift through workshop temperature fluctuations), non-magnetic (it does not pick up stray fields from nearby chucks or magnetic indicator stands), and “self-witnessing” — a damaged granite table shows a nick rather than a uniform bulge, so wear is visible and measurable rather than creeping.

Use the table as a reference floor for height gauge work, gauge block stack calibration, squareness checks with a steel square (e.g., 64-402145), parallelism packing under fixtures, and as a datum for any 1D scanning measurement. Pair with the 64-402196 family of measuring table stands or a dedicated granite stand for stable bench mounting.

Features

  • Granite measuring table, 400×400×70 mm
  • DIN 876/1 — inspection grade
  • Polished, ground working surface — gauge blocks wring directly against it
  • Non-magnetic, thermally stable, dimensionally stable through workshop temperature fluctuations
  • Self-witnessing wear: nicks rather than uniform bulges

Specifications

Material Granite
Standard DIN 876/1 (inspection grade)
Dimensions 400×400×70 mm
Article number 64-402002
Additional information
Weight 41,003 kg
Specification

The 400×400×70 mm granite measuring table, DIN 876/1, is the fundamental reference for any precision inspection bench — the dead-flat surface against which everything else is measured. DIN 876/1 is the inspection quality tolerance class: flatness within a few micrometers across the entire table, with the ground working surface allowing gauge blocks to be wrung directly against it for primary length references.

Granite is the right material for a measuring table for three reasons: thermal stability (approximately 1/3 of steel’s coefficient of expansion, so the table does not drift through workshop temperature fluctuations), non-magnetic (it does not pick up stray fields from nearby chucks or magnetic indicator stands), and “self-witnessing” — a damaged granite table shows a nick rather than a uniform bulge, so wear is visible and measurable rather than creeping.

Use the table as a reference floor for height gauge work, gauge block stack calibration, squareness checks with a steel square (e.g., 64-402145), parallelism packing under fixtures, and as a datum for any 1D scanning measurement. Pair with the 64-402196 family of measuring table stands or a dedicated granite stand for stable bench mounting.

Features

  • Granite measuring table, 400×400×70 mm
  • DIN 876/1 — inspection grade
  • Polished, ground working surface — gauge blocks wring directly against it
  • Non-magnetic, thermally stable, dimensionally stable through workshop temperature fluctuations
  • Self-witnessing wear: nicks rather than uniform bulges

Specifications

Material Granite
Standard DIN 876/1 (inspection grade)
Dimensions 400×400×70 mm
Article number 64-402002
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *