Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference Furnace
Item number 64-402003

Granite measuring plate, dimensions 630x400x70 mm, weight 65 kg, accuracy according to DIN 876/1

3.366 DKK

In stock

High-quality surface plate with dimensions of 630×400 mm. Ideal for precision work in the workshop industry, featuring a flat, ground surface that provides a perfect reference plane for accurate measurements. Suitable for the inspection and layout of workpieces with high precision. Robust construction ensures a long service life in professional environments.

Request a quote 64-402003

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

The 630×400×70 mm granite measuring table, DIN 876/1, is the fundamental reference for any precision inspection bench — the dead-flat surface against which everything else is measured. DIN 876/1 is the inspection quality tolerance class: flatness within a few micrometers across the entire table, with the ground working surface allowing gauge blocks to be wrung directly against it for primary length references.

Granite is the right material for a measuring table for three reasons: thermal stability (approximately 1/3 of steel’s coefficient of expansion, so the table does not drift through the workshop’s temperature fluctuations), non-magnetic (it does not pick up stray fields from nearby chucks or magnetic indicator stands), and “self-evidencing” — a damaged granite table shows a nick rather than a uniform bulge, so wear is visible and measurable rather than creeping.

Use the table as a reference floor for height gauge work, gauge block stack calibration, squareness checks with a steel square (e.g., 64-402145), parallelism packing under fixtures, and as a datum for any 1D scanning measurement. Pair with the 64-402196 family of measuring table stands or a dedicated granite stand for stable bench mounting.

Features

  • Granite measuring table, 630×400×70 mm
  • DIN 876/1 — inspection grade
  • Polished, ground working surface — gauge blocks wring directly against it
  • Non-magnetic, thermally stable, dimensionally stable through workshop temperature fluctuations
  • Self-evidencing wear: nicks rather than uniform bulges

Specifications

Material Granite
Standard DIN 876/1 (inspection grade)
Dimensions 630×400×70 mm
Article number 64-402003
Additional information
Weight 65,003 kg
Specification

The 630×400×70 mm granite measuring table, DIN 876/1, is the fundamental reference for any precision inspection bench — the dead-flat surface against which everything else is measured. DIN 876/1 is the inspection quality tolerance class: flatness within a few micrometers across the entire table, with the ground working surface allowing gauge blocks to be wrung directly against it for primary length references.

Granite is the right material for a measuring table for three reasons: thermal stability (approximately 1/3 of steel’s coefficient of expansion, so the table does not drift through the workshop’s temperature fluctuations), non-magnetic (it does not pick up stray fields from nearby chucks or magnetic indicator stands), and “self-evidencing” — a damaged granite table shows a nick rather than a uniform bulge, so wear is visible and measurable rather than creeping.

Use the table as a reference floor for height gauge work, gauge block stack calibration, squareness checks with a steel square (e.g., 64-402145), parallelism packing under fixtures, and as a datum for any 1D scanning measurement. Pair with the 64-402196 family of measuring table stands or a dedicated granite stand for stable bench mounting.

Features

  • Granite measuring table, 630×400×70 mm
  • DIN 876/1 — inspection grade
  • Polished, ground working surface — gauge blocks wring directly against it
  • Non-magnetic, thermally stable, dimensionally stable through workshop temperature fluctuations
  • Self-evidencing wear: nicks rather than uniform bulges

Specifications

Material Granite
Standard DIN 876/1 (inspection grade)
Dimensions 630×400×70 mm
Article number 64-402003
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *