Granite measuring plate, dimensions 250x250x50 mm, weight 13 kg, accuracy according to DIN 876/1
754 DKK
A robust 250×250 mm surface plate of high quality for precise surface control and measurement. Suitable for workshop environments, machine shops, and quality control. Provides an exact reference surface for accurate measurements and inspections of components. Manufactured for long service life and reliable performance.
Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%
- Gratis fragt over 3.000 kr. ekskl. moms
- Hand-held and bench measuring equipment from Mahr
Category: Granite Surface Plates
Description
The 250×250×50 mm granite surface plate, DIN 876/1, is the fundamental reference for any precision inspection bench — the dead-flat surface against which everything else is measured. DIN 876/1 is the inspection quality tolerance class: flatness within a few micrometers across the entire plate, with the ground working surface allowing gauge blocks to be wrung directly against it for primary length references.
Granite is the right material for a surface plate for three reasons: thermal stability (approximately 1/3 of steel’s coefficient of expansion, so the plate does not drift through workshop temperature fluctuations), non-magnetic (it does not pick up stray fields from nearby chucks or magnetic indicator stands), and “self-witnessing” — a damaged granite plate shows a nick rather than a smooth bulge, so wear is visible and measurable rather than creeping.
Use the plate as a reference floor for height gauge work, gauge block stack calibration, squareness checks with a steel square (e.g., 64-402145), parallelism packing under fixtures, and as a datum for any 1D scanning measurement. Pair with the 64-402196 family of surface plate stands or a dedicated granite stand for stable bench mounting.
Features
- Granite surface plate, 250×250×50 mm
- DIN 876/1 — inspection grade
- Polished, ground working surface — gauge blocks wring directly against it
- Non-magnetic, thermally stable, dimensionally stable through workshop temperature fluctuations
- Self-witnessing wear: nicks rather than smooth bulges
Specifications
| Material | Granite |
|---|---|
| Standard | DIN 876/1 (inspection grade) |
| Dimensions | 250×250×50 mm |
| Article number | 64-402000 |
Additional information
| Weight | 13,003 kg |
|---|
Specification
The 250×250×50 mm granite surface plate, DIN 876/1, is the fundamental reference for any precision inspection bench — the dead-flat surface against which everything else is measured. DIN 876/1 is the inspection quality tolerance class: flatness within a few micrometers across the entire plate, with the ground working surface allowing gauge blocks to be wrung directly against it for primary length references.
Granite is the right material for a surface plate for three reasons: thermal stability (approximately 1/3 of steel’s coefficient of expansion, so the plate does not drift through workshop temperature fluctuations), non-magnetic (it does not pick up stray fields from nearby chucks or magnetic indicator stands), and “self-witnessing” — a damaged granite plate shows a nick rather than a smooth bulge, so wear is visible and measurable rather than creeping.
Use the plate as a reference floor for height gauge work, gauge block stack calibration, squareness checks with a steel square (e.g., 64-402145), parallelism packing under fixtures, and as a datum for any 1D scanning measurement. Pair with the 64-402196 family of surface plate stands or a dedicated granite stand for stable bench mounting.
Features
- Granite surface plate, 250×250×50 mm
- DIN 876/1 — inspection grade
- Polished, ground working surface — gauge blocks wring directly against it
- Non-magnetic, thermally stable, dimensionally stable through workshop temperature fluctuations
- Self-witnessing wear: nicks rather than smooth bulges
Specifications
| Material | Granite |
|---|---|
| Standard | DIN 876/1 (inspection grade) |
| Dimensions | 250×250×50 mm |
| Article number | 64-402000 |
Reviews (0)
Be the first to review Cancel reply
Related products
-
64-402025Granite measuring plate, dimensions 800x500x100 mm, weight 136 kg, accuracy according to DIN 876/0
5.739 DKKIn stock -
64-402004Granite measuring plate, dimensions 630x630x80 mm, weight 108 kg, accuracy according to DIN 876/1
4.774 DKKIn stock -
64-402024Granite measuring plate, dimensions 630x630x80 mm, weight 108 kg, accuracy according to DIN 876/0
5.114 DKKIn stock -
64-402026Granite measuring plate, dimensions 900x600x100 mm, weight 188 kg, accuracy according to DIN 876/0
7.570 DKKIn stock

There are no reviews yet.