Granite measuring plate, dimensions 630x630x80 mm, weight 108 kg, accuracy according to DIN 876/1
4.774 DKK
Precision-machined granite measuring plate with dimensions of 630x630mm. Manufactured from high-quality stone for optimal stability and accuracy during measurement. Perfect for workshops and laboratories where precise measurements are critical. The flat surface ensures reliable results when inspecting and checking components.
Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%
- Gratis fragt over 3.000 kr. ekskl. moms
- Hand-held and bench measuring equipment from Mahr
Description
The 630×630×80 mm granite measuring table, DIN 876/1, is the fundamental reference for any precision inspection bench — the dead-flat surface against which everything else is measured. DIN 876/1 is the inspection quality tolerance class: flatness within a few micrometers across the entire table, with the ground working surface allowing gauge blocks to be wrung directly against it for primary length references.
Granite is the right material for a measuring table for three reasons: thermal stability (approximately 1/3 of steel’s coefficient of expansion, so the table does not drift through workshop temperature fluctuations), non-magnetic (it does not pick up stray fields from nearby chucks or magnetic indicator stands), and “self-evidencing” — a damaged granite table shows a nick rather than a uniform bulge, so wear is visible and measurable rather than creeping.
Use the table as a reference floor for height gauge work, gauge block stack calibration, squareness checks with a steel square (e.g., 64-402145), parallelism packing under fixtures, and as a datum for any 1D scanning measurement. Pair with the 64-402196 family of table stands or a dedicated granite stand for stable bench mounting.
Features
- Granite measuring table, 630×630×80 mm
- DIN 876/1 — inspection grade
- Polished, ground working surface — gauge blocks wring directly against it
- Non-magnetic, thermally stable, dimensionally stable through workshop temperature fluctuations
- Self-evidencing wear: nicks rather than uniform bulges
Specifications
| Material | Granite |
|---|---|
| Standard | DIN 876/1 (inspection grade) |
| Dimensions | 630×630×80 mm |
| Article number | 64-402004 |
Additional information
| Weight | 108,003 kg |
|---|
Specification
The 630×630×80 mm granite measuring table, DIN 876/1, is the fundamental reference for any precision inspection bench — the dead-flat surface against which everything else is measured. DIN 876/1 is the inspection quality tolerance class: flatness within a few micrometers across the entire table, with the ground working surface allowing gauge blocks to be wrung directly against it for primary length references.
Granite is the right material for a measuring table for three reasons: thermal stability (approximately 1/3 of steel’s coefficient of expansion, so the table does not drift through workshop temperature fluctuations), non-magnetic (it does not pick up stray fields from nearby chucks or magnetic indicator stands), and “self-evidencing” — a damaged granite table shows a nick rather than a uniform bulge, so wear is visible and measurable rather than creeping.
Use the table as a reference floor for height gauge work, gauge block stack calibration, squareness checks with a steel square (e.g., 64-402145), parallelism packing under fixtures, and as a datum for any 1D scanning measurement. Pair with the 64-402196 family of table stands or a dedicated granite stand for stable bench mounting.
Features
- Granite measuring table, 630×630×80 mm
- DIN 876/1 — inspection grade
- Polished, ground working surface — gauge blocks wring directly against it
- Non-magnetic, thermally stable, dimensionally stable through workshop temperature fluctuations
- Self-evidencing wear: nicks rather than uniform bulges
Specifications
| Material | Granite |
|---|---|
| Standard | DIN 876/1 (inspection grade) |
| Dimensions | 630×630×80 mm |
| Article number | 64-402004 |

There are no reviews yet.