Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One Instrument
Item number 17-830220

ETI Stainless Steel Mounting Clamp for Ø4 mm Penetration, e.g., for Oven Sensors

20 DKK

In stock

Probe holder clamps for bimetal thermometers. 

  • Supplied complete with mounting clamp
  • Holds probes securely in place
  • Two sizes – Ø3 / Ø3.3 mm shaft diameter
  • Or Ø4 mm probe stem diameter
  • Clamp size: 4 mm
Request a quote 17-830220

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Probe clamps for thermometers – These stainless steel probe holders clamp onto the top of a kettle or similar container to keep a temperature probe in place. Two models are available: one that accepts either a Ø3 or Ø3.3 mm probe stem, and another designed to work with a bimetal thermometer, accepting a Ø4 mm probe stem. To ensure maximum accuracy when taking readings, the probe should not touch the bottom or sides of the container.

Additional information
Product Type

Føler

Klämmstorlek

9089

Kategori

Tilbehør

Product Type

Stativ & Beslag

Trådløs

Nej

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *