Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the thermometer reads 3.0 °C but the product is at 5.5 °C: how to check your thermocouples at three pointsThe temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the thermometer reads 3.0 °C but the product is at 5.5 °C: how to check your thermocouples at three pointsThe temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handle
Item number 17-830500

ETI Probe Holder, Steel Clamp with 3.3 mm Hole

39 DKK

In stock

Probe holder clamps for bimetal thermometers. 

  • Supplied complete with mounting clamp
  • Holds probes securely in place
  • Two sizes – Ø3 / Ø3.3 mm shaft diameter
  • Or Ø4 mm probe stem diameter
  • Clamp size: 3.3 or 3 mm
Request a quote 17-830500

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Probe clamps for thermometers – These stainless steel probe holders clamp onto the top of a kettle or similar container to secure a temperature probe in place. Two models are available: one that accepts either a Ø3 or Ø3.3 mm probe stem, and another designed to work with a bimetal thermometer, accepting a Ø4 mm probe stem. To ensure maximum accuracy when taking readings, the probe should not touch the bottom or sides of the container.

Additional information
Product Type

Stativ & Beslag

Klämmstorlek

9091

Kategori

Tilbehør

Product Type

Stativ & Beslag

Trådløs

Nej

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *