Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the thermometer reads 3.0 °C but the product is at 5.5 °C: how to check your thermocouples at three pointsThe temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the thermometer reads 3.0 °C but the product is at 5.5 °C: how to check your thermocouples at three pointsThe temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handle
Item number 17-810951

ETI Replacement Probe for EcoTemp®

113 DKK

In stock

Replacement immersion probe for 810-950 EcoTemp thermometer

  • temperature range -49.9 to 199.9 °C
  • dimensions Ø3.5 x 125 mm
  • supplied with a 700 mm silicone connection cable
Documents:810 951 C of C
Request a quote 17-810951

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Other models in the series 16

Description

This stainless steel penetrating temperature probe is a direct replacement for the original probe supplied with the 810-950 EcoTemp thermometer.

If you have lost the original probe, or simply need a spare part, this offers an affordable replacement, designed specifically for use with the ETI EcoTemp thermometer, providing simple, fast, and accurate temperature measurements.

The probe dimensions are Ø3.5 x 125 mm with a 700 mm silicone connection cable.

Temperature range -49.9 to 199.9 °C


Range: -49.9 to 199.9 °C
Probe diameter: 3.5 mm
Probe length: 125 mm
Additional information
Product Type

Føler

Kategori

Indstiksføler

Product Type

Sensor

Tilbehør Beskyttelse & Opbevaring

17-830215,17-830220

Trådløs

Nej

PDF (1)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *

Tilbehør Beskyttelse & Opbevaring

ETI Soft PVC Cover Suitable for, Among Other Things, EcoTemp® Thermometer
17-830215
93 DKK
Lägg i varukorgen
ETI Stainless Steel Mounting Clamp for Ø4 mm Penetration, e.g., for Oven Sensors
17-830220
20 DKK
Lägg i varukorgen