Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%See the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%See the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticed
Item number 64-830002

Setting ring according to DIN 2250 form C, 1.2 mm, size indication to three decimal places

2.188 DKK

In stock

Precision setting ring with a 1.2 mm size for accurate calibration and adjustment of measuring instruments. Ideal for workshops, quality control, and other applications requiring high measurement precision. Manufactured from high-quality materials for long-lasting durability and reliable measurement results.

Request a quote 64-830002

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Select Setting Ring, ø1.2 mm, DIN 2250 form C, Class 1 to 4mm is a precision hole master ring used as a zero reference for internal measuring instruments — three-point internal micrometers (Mitutoyo Holtest, TESA Imicro, Mitutoyo Borematic) and hole gauges that require a known-diameter master for calibration.

DIN 2250 form C is the ring-type variant of the gauge block standard family. The Form C designation distinguishes the design from Form A and Form B; Form C is the standard inspection bench configuration.

The accuracy specification “Class 1 to 4mm” is the tolerance band declared by the manufacturer. Hardened steel construction: the ID surface is precision ground after heat treatment.

Common applications: zero-setting reference for three-point internal micrometers, calibration master for hole gauges with dial indicators, periodic accuracy verification of internal measuring instruments. Combine with Mitutoyo gauge block maintenance kit (item 64-516650).

Features

  • Select Setting Ring, ø1.2 mm
  • DIN 2250 form C — standard inspection bench configuration
  • Accuracy: Class 1 to 4mm
  • Precision ground internal diameter
  • Hardened steel — long-life calibration reference
  • Zero reference for internal measuring instruments

Specifications

Type Setting Ring (DIN 2250 form C)
Diameter ø1.2 mm
Accuracy Class 1 to 4mm
Standard DIN 250 form C
Item Number 64-830002

Compatible Accessories

Mitutoyo gauge block maintenance kit (item 64-516650). Mitutoyo Holtest, TESA Imicro and Mitutoyo Borematic internal micrometers.

Additional information
Weight 0,014 kg
Specification

Select Setting Ring, ø1.2 mm, DIN 2250 form C, Class 1 to 4mm is a precision hole master ring used as a zero reference for internal measuring instruments — three-point internal micrometers (Mitutoyo Holtest, TESA Imicro, Mitutoyo Borematic) and hole gauges that require a known-diameter master for calibration.

DIN 2250 form C is the ring-type variant of the gauge block standard family. The Form C designation distinguishes the design from Form A and Form B; Form C is the standard inspection bench configuration.

The accuracy specification “Class 1 to 4mm” is the tolerance band declared by the manufacturer. Hardened steel construction: the ID surface is precision ground after heat treatment.

Common applications: zero-setting reference for three-point internal micrometers, calibration master for hole gauges with dial indicators, periodic accuracy verification of internal measuring instruments. Combine with Mitutoyo gauge block maintenance kit (item 64-516650).

Features

  • Select Setting Ring, ø1.2 mm
  • DIN 2250 form C — standard inspection bench configuration
  • Accuracy: Class 1 to 4mm
  • Precision ground internal diameter
  • Hardened steel — long-life calibration reference
  • Zero reference for internal measuring instruments

Specifications

Type Setting Ring (DIN 2250 form C)
Diameter ø1.2 mm
Accuracy Class 1 to 4mm
Standard DIN 250 form C
Item Number 64-830002

Compatible Accessories

Mitutoyo gauge block maintenance kit (item 64-516650). Mitutoyo Holtest, TESA Imicro and Mitutoyo Borematic internal micrometers.

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *