Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolutionVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolution
Item number 17-825078

ETI Mounting Plates for Kamado Smoker, Smoke

157 DKK

In stock

Kamado mounting plates for ribs

Easy attachment for bellows fan
Easy to install
Size guides below

Request a quote 17-825078

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Other models in the series 16

Description

This pair of Kamado Mounting Plates for Billows enables easy installation of the Billows temperature control fan next to your Kamado Smoker.
Billows is designed to work with most smokers. Some applications may require an optional mounting kit.
Kamado-style smoker Mounting Plates for Billows
Large plate: 3.54 H x 3.01 W x 0.01 D inches (90 H x 76.5 W x 0.5 D mm)
Small plate: 3.11 H x 2.75 W x 0.01 D inches (79 H x 70 W x 0.5 D mm)
Both mounting plates have an opening of 1.25 x 1.25 inches (33 x 33 mm).
Universal bellows mounting kit Fits factory-installed ports measuring 30 mm (1.18 inches) in diameter.
3/4″ threaded bellows mounting kit
Designed to screw into a 3/4″ ball valve
1.5″ threaded bellows mounting kit
Designed to screw into a 1.5″ ball valve
2″ threaded bellows mounting kit
Designed to screw into a 2″ ball valve

Additional information
Product Type

Stativ & Beslag

Trådløs

Nej

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *