Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference Furnace
Item number 64-670043

Steel square, polished measuring surface, accuracy per DIN 875/2 (Class III), dimensions 150×100 mm, cross-section 25×5 mm

100 DKK

In stock

High-quality flat file with a square cross-section, 150×100 mm. Perfect for precision filing of flat surfaces and right angles in various materials. The ergonomic design provides excellent control and comfortable handling during mechanical work. Ideal for both professional workshops and home use where precise results are required.

Request a quote 64-670043

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Flat steel square, DIN 875/2, 150×100 mm is the general-purpose squareness reference for verifying that two surfaces meet at 90° within the standard’s tolerance band. The flat-bar geometry — a long blade mounted at a right angle to a short stock — allows the precision-finished blade to be placed against a workpiece surface while the stock rests against the other surface; any lack of squareness is indicated by a light gap or blade clearance. DIN 875/2 is the general-purpose grade — the right choice for daily fitter’s bench squareness work where the tighter DIN 875/1 class is not specified. The tolerance band is wider than DIN 875/1, but the form factor and working surface quality are otherwise the same — making 875/2 the cost-effective choice.

The cross-section is 25×5 mm — dimensioned for the size class so that the blade has the bending stiffness to resist operator pressure flex during squareness checks. A thin blade would deflect under contact pressure and give a false reading. The cross-section/length ratio is designed according to the standard for this reason.

The flat-square form (as opposed to the knife-edge form, the other DIN 875 variant) provides a robust working surface that withstands handling on a fitter’s bench. Knife-edge squares are more sensitive — light band gaps under 1 µm are visible against a polished surface — but the edge is fragile.

Common applications: machined edge squareness verification on a manufactured bracket, fitter’s bench layout squareness check during assembly, jig and fixture base squareness verification. Step up to DIN 875/1 for tighter workshop-grade verification, or to DIN 875/0 for inspection-class work.

Features

  • Flat steel square, DIN 875/2
  • Dimensions 150×100 mm, cross-section 25×5 mm
  • Precision-finished working surfaces (blade and stock)
  • General-purpose accuracy
  • Flat-bar geometry — robust under bench handling

Specifications

Type Flat steel square
Class DIN 875/2
Dimensions 150×100 mm
Cross-section 25×5 mm
Article number 64-670043

Compatible accessories

Feeler gauges (sold separately) for gap measurement against the blade. Mitutoyo precision level for combined squareness and level verification. Mitutoyo gauge block maintenance kit (article 64-516650).

Additional information
Weight 0,236 kg
Specification

Flat steel square, DIN 875/2, 150×100 mm is the general-purpose squareness reference for verifying that two surfaces meet at 90° within the standard’s tolerance band. The flat-bar geometry — a long blade mounted at a right angle to a short stock — allows the precision-finished blade to be placed against a workpiece surface while the stock rests against the other surface; any lack of squareness is indicated by a light gap or blade clearance. DIN 875/2 is the general-purpose grade — the right choice for daily fitter’s bench squareness work where the tighter DIN 875/1 class is not specified. The tolerance band is wider than DIN 875/1, but the form factor and working surface quality are otherwise the same — making 875/2 the cost-effective choice.

The cross-section is 25×5 mm — dimensioned for the size class so that the blade has the bending stiffness to resist operator pressure flex during squareness checks. A thin blade would deflect under contact pressure and give a false reading. The cross-section/length ratio is designed according to the standard for this reason.

The flat-square form (as opposed to the knife-edge form, the other DIN 875 variant) provides a robust working surface that withstands handling on a fitter’s bench. Knife-edge squares are more sensitive — light band gaps under 1 µm are visible against a polished surface — but the edge is fragile.

Common applications: machined edge squareness verification on a manufactured bracket, fitter’s bench layout squareness check during assembly, jig and fixture base squareness verification. Step up to DIN 875/1 for tighter workshop-grade verification, or to DIN 875/0 for inspection-class work.

Features

  • Flat steel square, DIN 875/2
  • Dimensions 150×100 mm, cross-section 25×5 mm
  • Precision-finished working surfaces (blade and stock)
  • General-purpose accuracy
  • Flat-bar geometry — robust under bench handling

Specifications

Type Flat steel square
Class DIN 875/2
Dimensions 150×100 mm
Cross-section 25×5 mm
Article number 64-670043

Compatible accessories

Feeler gauges (sold separately) for gap measurement against the blade. Mitutoyo precision level for combined squareness and level verification. Mitutoyo gauge block maintenance kit (article 64-516650).

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *