Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference Furnace
Item number 64-670023

Plan steel square, polished measuring surface, accuracy per DIN 875/1, dimensions 100×70 mm, cross-section 20×5 mm

97 DKK

In stock

This high-quality flat file is perfect for metalworking and fine finishing. With its precise dimensions of 100×70 mm, the tool delivers accurate results when filing flat surfaces. Ideal for both professional craftsmen and hobbyists who require precision and durability for all types of metalwork.

Request a quote 64-670023

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Flat steel square, DIN 875/1, 100×70 mm is the precision squareness reference for verifying that two surfaces meet at 90° within the standard’s tolerance band. The flat-bar geometry — a long blade mounted at a right angle to a short stock — places the precision-finished blade against a workpiece surface while the stock rests against the other surface; any lack of squareness is indicated by a light gap or blade clearance. DIN 875/1 is the workshop grade — suitable for general fitting, layout, and assembly squareness checks.

The cross-section is 20×5 mm — dimensioned to the size class so that the blade has the bending stiffness to resist operator pressure flex during squareness checks. A thin blade would deflect under contact pressure and give a false reading. The cross-section/length ratio is designed according to the standard for this reason.

The flat-square form (as opposed to the knife-edge form, the other DIN 875 variant) provides a robust working surface that withstands handling on a fitter’s bench. Knife-edge squares are more sensitive — light band gaps under 1 µm are visible against a polished surface — but the edge is fragile.

Common applications: machined edge squareness verification on a manufactured bracket, fitter’s bench layout squareness check during assembly, jig and fixture base squareness verification, and as a squareness master for transferring 90° to a workpiece during scribed line layout.

Features

  • Flat steel square, DIN 875/1
  • Dimensions 100×70 mm, cross-section 20×5 mm
  • Precision-finished working surfaces (blade and stock)
  • Workshop grade accuracy — general fitting and layout
  • Flat-bar geometry — robust under bench handling

Specifications

Type Flat steel square
Class DIN 875/1
Dimensions 100×70 mm
Cross-section 20×5 mm
Article number 64-670023

Compatible accessories

Blade gauge (sold separately) for clearance measurement against the blade. Mitutoyo precision spirit level for combined squareness and level verification. Mitutoyo gauge block maintenance kit (article 64-516650).

Additional information
Weight 0,128 kg
Specification

Flat steel square, DIN 875/1, 100×70 mm is the precision squareness reference for verifying that two surfaces meet at 90° within the standard’s tolerance band. The flat-bar geometry — a long blade mounted at a right angle to a short stock — places the precision-finished blade against a workpiece surface while the stock rests against the other surface; any lack of squareness is indicated by a light gap or blade clearance. DIN 875/1 is the workshop grade — suitable for general fitting, layout, and assembly squareness checks.

The cross-section is 20×5 mm — dimensioned to the size class so that the blade has the bending stiffness to resist operator pressure flex during squareness checks. A thin blade would deflect under contact pressure and give a false reading. The cross-section/length ratio is designed according to the standard for this reason.

The flat-square form (as opposed to the knife-edge form, the other DIN 875 variant) provides a robust working surface that withstands handling on a fitter’s bench. Knife-edge squares are more sensitive — light band gaps under 1 µm are visible against a polished surface — but the edge is fragile.

Common applications: machined edge squareness verification on a manufactured bracket, fitter’s bench layout squareness check during assembly, jig and fixture base squareness verification, and as a squareness master for transferring 90° to a workpiece during scribed line layout.

Features

  • Flat steel square, DIN 875/1
  • Dimensions 100×70 mm, cross-section 20×5 mm
  • Precision-finished working surfaces (blade and stock)
  • Workshop grade accuracy — general fitting and layout
  • Flat-bar geometry — robust under bench handling

Specifications

Type Flat steel square
Class DIN 875/1
Dimensions 100×70 mm
Cross-section 20×5 mm
Article number 64-670023

Compatible accessories

Blade gauge (sold separately) for clearance measurement against the blade. Mitutoyo precision spirit level for combined squareness and level verification. Mitutoyo gauge block maintenance kit (article 64-516650).

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *