Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One Instrument
Item number 64-850017

Surface Roughness Test for Blasted Surfaces, Shot Blasting, Each Plate Consists of Four Roughness Test Coupons for Grain and Shot Blasting in 4 Segments, Supplied in Soft Case, Standardized per ISO

2.023 DKK

In stock

Specialized standard reference for measuring surface roughness in materials treated with shot blasting. Perfect for quality control in manufacturing processes where surface finish is critical. Provides reliable comparison values to ensure consistent surface treatment and optimal product quality.

Request a quote 64-850017

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Roughness specimens for shot blasting (4 specimens per plate) is a Schut precision instrument from the ECONOMY series — used for workshop measurement, inspection, and reference work in machine shop and manufacturing environments. Hardened and ground reference surfaces provide repeatable measurements; the instrument is designed for handheld or fixture-mounted use depending on the workshop application.

Hardened and ground reference surfaces and contact points ensure repeatable measurements; matched to Schut precision quality class. The instrument integrates with standard inspection workflows in metrology labs and machine shop QC stations.

Usage: position the instrument against the workpiece’s reference surface or feature, and perform the measurement according to the instrument’s standard procedure (depending on type — direct reading, comparative deviation, go/no-go verification, or wrung-stack reference). Zero-verify against a setting standard during periodic verification. Document with a calibration certificate. The instrument’s design supports both one-off inspections and back-to-back QC workflows; its hardened reference surfaces withstand wear from regular workshop use over years of service.

Common applications: workshop incoming inspection of components, on-machine setup checks, fitter and toolmaker bench measurements, calibration lab reference work, and QC workflows within the Schut product line where this instrument’s specific role is applicable. The ROUGHNESS SPECIMENS category is the standard workshop tool for measurement/reference tasks.

Features

  • Roughness specimens for shot blasting (4 specimens per plate)
  • Hardened, ground reference surfaces for repeatable measurements
  • Schut build quality
  • Suitable for workshop QC, calibration lab, and bench measurement applications

Specifications

Manufacturer Schut
Type Roughness specimens for blasted surfaces
Article number 64-850017

Compatible accessories

Compatible accessories: Schut setting standards and reference standards for periodic verification of accuracy at known dimensions; calibration certificates (ISO 17025) upon initial delivery and periodic verification — typically a 12-month interval for production floors, 6 months for high-volume lines; Schut protective cases and bench storage; Schut spare parts and consumables where applicable.

Additional information
Weight 0,096 kg
Specification

Roughness specimens for shot blasting (4 specimens per plate) is a Schut precision instrument from the ECONOMY series — used for workshop measurement, inspection, and reference work in machine shop and manufacturing environments. Hardened and ground reference surfaces provide repeatable measurements; the instrument is designed for handheld or fixture-mounted use depending on the workshop application.

Hardened and ground reference surfaces and contact points ensure repeatable measurements; matched to Schut precision quality class. The instrument integrates with standard inspection workflows in metrology labs and machine shop QC stations.

Usage: position the instrument against the workpiece’s reference surface or feature, and perform the measurement according to the instrument’s standard procedure (depending on type — direct reading, comparative deviation, go/no-go verification, or wrung-stack reference). Zero-verify against a setting standard during periodic verification. Document with a calibration certificate. The instrument’s design supports both one-off inspections and back-to-back QC workflows; its hardened reference surfaces withstand wear from regular workshop use over years of service.

Common applications: workshop incoming inspection of components, on-machine setup checks, fitter and toolmaker bench measurements, calibration lab reference work, and QC workflows within the Schut product line where this instrument’s specific role is applicable. The ROUGHNESS SPECIMENS category is the standard workshop tool for measurement/reference tasks.

Features

  • Roughness specimens for shot blasting (4 specimens per plate)
  • Hardened, ground reference surfaces for repeatable measurements
  • Schut build quality
  • Suitable for workshop QC, calibration lab, and bench measurement applications

Specifications

Manufacturer Schut
Type Roughness specimens for blasted surfaces
Article number 64-850017

Compatible accessories

Compatible accessories: Schut setting standards and reference standards for periodic verification of accuracy at known dimensions; calibration certificates (ISO 17025) upon initial delivery and periodic verification — typically a 12-month interval for production floors, 6 months for high-volume lines; Schut protective cases and bench storage; Schut spare parts and consumables where applicable.

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *