Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One Instrument
Item number 64-836690

Thread pair for thread measurement, micrometers with measuring face Ø8 mm, thread diameter 0.22 mm, metric pitch 0.35 mm, UN/UNC/UNF 72 threads per inch

1.508 DKK

In stock

This measuring thread set with a diameter of 0.195 mm is designed for precision reading of an 8.00 mm pitch. Perfect for professional measurements where accuracy is critical. A reliable tool for technicians and engineers working with detailed mechanical components who require precise dimensional control.

Request a quote 64-836690

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Thread measuring wire ø8 mm is a precision-ground tool steel wire used in the three-wire method to verify the pitch diameter of screw threads. The three-wire method provides more accurate pitch diameter measurement than direct reading with a thread micrometer — three wires of identical diameter (maintained as a matched set in the inspection laboratory) create a measurement geometry that cancels first-order errors.

Wire diameter ø8 mm. Lapped to tight tolerance, hardened, and supplied with documented diameter calibration. Use a matching thread micrometer or universal micrometer for the actual measurement step.

Usage: Select three wires with a diameter matched to the thread pitch (the manufacturer’s table provides the correct wire diameter for a specific thread pitch). Place two wires in adjacent grooves on one side of the thread and one on the opposite side. Measure over the wires with a standard outside micrometer. Apply the three-wire formula: pitch diameter = M − 3w + 0.866p (where M is the over-wire reading, w is the wire diameter, and p is the thread pitch).

Common applications: Thread QC inspection in machine shops performing screw machining, calibration lab thread form verification, line-side QC on thread cutting operations, and all applications where direct thread micrometer readings need to be verified against the more accurate three-wire reference.

Features

  • Thread measuring wire ø8 mm
  • Hardened, ground reference surfaces for repeatable measurement
  • Schut build quality
  • Suitable for workshop QC, calibration lab, and bench measurement applications
  • SWISS MADE series

Specifications

Manufacturer Schut
Series SWISS MADE
Type Thread measuring wires
Article number 64-836690

Compatible accessories

Compatible accessories: Schut setting standards and reference standards for periodic verification of accuracy at known dimensions; calibration certificate (ISO 17025) upon initial delivery and periodic verification — typically a 12-month interval for production floors, 6 months for high-volume lines; Schut protective cases and bench storage; Schut spare parts and consumables where applicable.

Additional information
Weight 0,021 kg
Wire Diameter

ø8 mm

Wire Diameter D1 mm

0,20

Metric Pitch mm

0,35; 0,4

Whitworth Threads Per Inch

–

UN UNC UNF Threads Per Inch

–

Variants

64-836689,64-836690,64-836691,64-834844,64-834499,64-834498,64-837848,64-833872,64-834585,64-834480,64-834586,64-834290,64-834502,64-834291,64-833871,64-834292,64-834416,64-834483,64-834509

Variant Properties

wire_diameter_d1_mm,metric_pitch_mm,whitworth_threads_per_inch,un_unc_unf_threads_per_inch

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *