Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference Furnace
Item number 64-779176

Thread pair for thread measurement, micrometers with measuring face Ø6.5 mm, thread diameter 3.20 mm, metric pitch 5.0-5.5 mm, Whitworth 5-4.5 threads per inch, UN/UNC/UNF 5-4.5 threads per inch

1.508 DKK

In stock

High-quality measuring wires with diameters ranging from 3.2 to 6.5 mm for precise thread measurement. Perfect for workshops, industry, and quality control. A reliable tool for ensuring exact dimensions on threads and other precision components, providing trustworthy results during manufacturing and maintenance.

Request a quote 64-779176

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Thread measuring wire ø6.5 mm is a precision-ground tool steel wire used in the three-wire method to verify the pitch diameter of screw threads. The three-wire method provides more accurate pitch diameter measurements than direct reading with a thread micrometer — three wires of identical diameter (maintained as a matched set in the inspection laboratory) create a measurement geometry that cancels out first-order errors.

Wire diameter ø6.5 mm. Lapped to tight tolerances, hardened, and supplied with documented diameter calibration. Use a matching thread micrometer or universal micrometer for the actual measurement step.

Usage: Select three wires with a diameter matched to the thread pitch (the manufacturer’s table provides the correct wire diameter for a specific thread pitch). Place two wires in adjacent grooves on one side of the thread and one wire on the opposite side. Measure over the wires with a standard outside micrometer. Apply the three-wire formula: pitch diameter = M − 3w + 0.866p (where M is the over-wire reading, w is the wire diameter, and p is the thread pitch).

Common applications: Thread QC inspection in machine shops performing screw machining, calibration lab thread form verification, line-side QC on thread cutting operations, and all applications where direct thread micrometer readings need to be verified against the more accurate three-wire reference.

Features

  • Thread measuring wire ø6.5 mm
  • Hardened, ground reference surfaces for repeatable measurement
  • Schut build quality
  • Suitable for workshop QC, calibration labs, and bench measurement applications
  • SWISS MADE series

Specifications

Manufacturer Schut
Series SWISS MADE
Type Thread measuring wires
Article number 64-779176

Compatible accessories

Compatible accessories: Schut setting standards and reference standards for periodic verification of accuracy at known dimensions; calibration certificate (ISO 17025) upon initial delivery and for periodic verification — typically a 12-month interval for production floors, 6 months for high-volume lines; Schut protective cases and bench storage; Schut spare parts and consumables where applicable.

Additional information
Weight 0,012 kg
Wire Diameter

dia. 6.5 mm

Wire Diameter D1 mm

84

Metric Pitch mm

–

Whitworth Threads Per Inch

–

UN UNC UNF Threads Per Inch

14

Variants

64-779161,64-781651,64-779162,64-779163,64-779164,64-779165,64-781652,64-779166,64-779167,64-779168,64-779169,64-779170,64-779171,64-779172,64-779173,64-779174,64-779175,64-779176,64-837642

Variant Properties

wire_diameter_d1_mm,metric_pitch_mm,whitworth_threads_per_inch,un_unc_unf_threads_per_inch

Specification

Thread measuring wire ø6.5 mm is a precision-ground tool steel wire used in the three-wire method to verify the pitch diameter of screw threads. The three-wire method provides more accurate pitch diameter measurements than direct reading with a thread micrometer — three wires of identical diameter (maintained as a matched set in the inspection laboratory) create a measurement geometry that cancels out first-order errors.

Wire diameter ø6.5 mm. Lapped to tight tolerances, hardened, and supplied with documented diameter calibration. Use a matching thread micrometer or universal micrometer for the actual measurement step.

Usage: Select three wires with a diameter matched to the thread pitch (the manufacturer’s table provides the correct wire diameter for a specific thread pitch). Place two wires in adjacent grooves on one side of the thread and one wire on the opposite side. Measure over the wires with a standard outside micrometer. Apply the three-wire formula: pitch diameter = M − 3w + 0.866p (where M is the over-wire reading, w is the wire diameter, and p is the thread pitch).

Common applications: Thread QC inspection in machine shops performing screw machining, calibration lab thread form verification, line-side QC on thread cutting operations, and all applications where direct thread micrometer readings need to be verified against the more accurate three-wire reference.

Features

  • Thread measuring wire ø6.5 mm
  • Hardened, ground reference surfaces for repeatable measurement
  • Schut build quality
  • Suitable for workshop QC, calibration labs, and bench measurement applications
  • SWISS MADE series

Specifications

Manufacturer Schut
Series SWISS MADE
Type Thread measuring wires
Article number 64-779176

Compatible accessories

Compatible accessories: Schut setting standards and reference standards for periodic verification of accuracy at known dimensions; calibration certificate (ISO 17025) upon initial delivery and for periodic verification — typically a 12-month interval for production floors, 6 months for high-volume lines; Schut protective cases and bench storage; Schut spare parts and consumables where applicable.

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *