Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%See the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%See the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticed
Item number 64-837642

Set of thread measuring wires 4.000 mm / measuring face 6.50 mm

4.707 DKK

In stock

Precision set of measuring wires, specially designed for accurate measurement. Includes wires with a 4.000 mm diameter and a measuring surface of 6.50 mm. Perfect for quality control and precise measurements in the workshop industry. Made from high-quality material for long-lasting durability and reliable results.

Request a quote 64-837642

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Thread measuring wire ø6.5 mm is a precision-ground tool steel wire used in the three-wire method to verify the pitch diameter of screw threads. The three-wire method provides a more accurate pitch diameter than direct reading with a thread micrometer — three wires of identical diameter (maintained as a matched set in the inspection laboratory) create a measurement geometry that cancels first-order errors.

Wire diameter ø6.5 mm. Lapped to tight tolerance, hardened, and supplied with documented diameter calibration. Use a matching thread micrometer or universal micrometer for the actual measurement step.

Usage: Select three wires of diameter matched to the thread pitch (the manufacturer’s table provides the correct wire diameter for a specific thread pitch). Place two wires in adjacent grooves on one side of the thread, and one on the opposite side. Measure over the wires with a standard outside micrometer. Apply the three-wire formula: pitch diameter = M − 3w + 0.866p (where M is the over-wire reading, w is the wire diameter, and p is the thread pitch).

Common applications: Thread QC inspection in machine shops performing screw machining, calibration lab thread form verification, line-side QC on thread cutting operations, and all applications where direct thread micrometer readings need to be verified against the more accurate three-wire reference.

Features

  • Thread measuring wire ø6.5 mm
  • Hardened, ground reference surfaces for repeatable measurement
  • Schut build quality
  • Suitable for workshop QC, calibration lab, and bench measurement applications
  • SWISS MADE series

Specifications

Manufacturer Schut
Series SWISS MADE
Type Thread measuring wires
Article number 64-837642

Compatible accessories

Compatible accessories: Schut setting standards and reference standards for periodic verification of accuracy at known dimensions; calibration certificate (ISO 17025) at initial delivery and for periodic verification — typically a 12-month interval for production floors, 6 months for high-volume lines; Schut protective cases and bench storage; Schut spare parts and consumables where applicable.

Additional information
Weight 0,011 kg
Wire Diameter

dia. 6.5 mm

Wire Diameter D1 mm

00

Metric Pitch mm

–

Whitworth Threads Per Inch

–

UN UNC UNF Threads Per Inch

5

Variants

64-779161,64-781651,64-779162,64-779163,64-779164,64-779165,64-781652,64-779166,64-779167,64-779168,64-779169,64-779170,64-779171,64-779172,64-779173,64-779174,64-779175,64-779176,64-837642

Variant Properties

wire_diameter_d1_mm,metric_pitch_mm,whitworth_threads_per_inch,un_unc_unf_threads_per_inch

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *