Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One Instrument
Item number 64-835163

Tolerance table, tolerances and fits according to ISO 286-2 up to 500 mm

570 DKK

In stock

Practical tolerance table for quick and easy reading of tolerance values. Provides clear information on permissible dimensional deviations for various fit dimensions according to ISO standards. An indispensable tool for designers, engineers, and production personnel who need exact tolerance references in their daily work.

Request a quote 64-835163

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Tolerance table is a Schut precision instrument from the ECONOMY LINE series — used for workshop measurement, inspection, and reference work in machine shop and manufacturing environments. Hardened and ground reference surfaces ensure repeatable measurements; the instrument is designed for handheld or fixture-mounted use depending on the workshop application.

ECONOMY LINE build quality. Hardened and ground reference surfaces and contact points for repeatable measurements; matched to Schut precision quality class. The instrument is designed for handheld or fixture-mounted use depending on the workshop application, and integrates with standard inspection workflows in metrology labs and machine shop QC stations.

Usage: position the instrument against the workpiece’s reference surface or feature, and perform the measurement according to the instrument’s standard procedure (depending on type — direct reading, comparative deviation, go/no-go verification, or wrung-stack reference). Zero-verify against a setting standard during periodic verification and document with a calibration certificate. The instrument’s design supports both one-off inspections and back-to-back QC workflows.

Common applications: workshop incoming inspection of components, on-machine setup checks, fitter and toolmaker bench measurements, calibration lab reference work, and QC workflows within the Schut product line. The MICROMETER ACCESSORIES category is the standard workshop tool for the measurement/reference task covered by this product.

Features

  • Tolerance table
  • Hardened, ground reference surfaces for repeatable measurements
  • Schut build quality
  • Suitable for workshop QC, calibration lab, and bench measurement applications
  • ECONOMY LINE series

Specifications

Manufacturer Schut
Series ECONOMY LINE
Type Thread and tolerance tables
Article number 64-835163

Compatible accessories

Compatible accessories: Schut setting standards and reference standards for periodic verification of accuracy at known dimensions; calibration certificates (ISO 17025) upon initial delivery and during periodic verification — typically a 12-month interval for production floors, 6 months for high-volume inspection chains; Schut protective cases and bench storage; Schut spare parts and consumables where applicable.

Additional information
Weight 0,099 kg
Bordtype

tolerance

Standard

ISO 286-2

Range mm

up to 500

Tolerance Pairs

over 6400

Variants

64-835162,64-835164

Variant Properties

table_type

Specification

Tolerance table is a Schut precision instrument from the ECONOMY LINE series — used for workshop measurement, inspection, and reference work in machine shop and manufacturing environments. Hardened and ground reference surfaces ensure repeatable measurements; the instrument is designed for handheld or fixture-mounted use depending on the workshop application.

ECONOMY LINE build quality. Hardened and ground reference surfaces and contact points for repeatable measurements; matched to Schut precision quality class. The instrument is designed for handheld or fixture-mounted use depending on the workshop application, and integrates with standard inspection workflows in metrology labs and machine shop QC stations.

Usage: position the instrument against the workpiece’s reference surface or feature, and perform the measurement according to the instrument’s standard procedure (depending on type — direct reading, comparative deviation, go/no-go verification, or wrung-stack reference). Zero-verify against a setting standard during periodic verification and document with a calibration certificate. The instrument’s design supports both one-off inspections and back-to-back QC workflows.

Common applications: workshop incoming inspection of components, on-machine setup checks, fitter and toolmaker bench measurements, calibration lab reference work, and QC workflows within the Schut product line. The MICROMETER ACCESSORIES category is the standard workshop tool for the measurement/reference task covered by this product.

Features

  • Tolerance table
  • Hardened, ground reference surfaces for repeatable measurements
  • Schut build quality
  • Suitable for workshop QC, calibration lab, and bench measurement applications
  • ECONOMY LINE series

Specifications

Manufacturer Schut
Series ECONOMY LINE
Type Thread and tolerance tables
Article number 64-835163

Compatible accessories

Compatible accessories: Schut setting standards and reference standards for periodic verification of accuracy at known dimensions; calibration certificates (ISO 17025) upon initial delivery and during periodic verification — typically a 12-month interval for production floors, 6 months for high-volume inspection chains; Schut protective cases and bench storage; Schut spare parts and consumables where applicable.

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *