Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%See the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%See the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticed
Item number 64-908983

Micrometer Stand, Measuring Range 4-12 mm, Adjustable Tilt, Cast Steel, Weight 1.1 kg

254 DKK

In stock

A stable stand for micrometers that provides excellent stability during measurement. Perfect for precise measurement in workshop environments where exact results are required. The stand securely holds the micrometer in place for consistent and reliable measurement, minimizing the risk of errors and increasing efficiency in quality control processes.

Request a quote 64-908983

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Cast steel stand for micrometers is a Schut precision instrument from the ECONOMY LINE series — used for workshop measurement, inspection, and reference work in machine shop and manufacturing environments. Hardened and ground reference surfaces ensure repeatable measurements; the instrument is designed for handheld or fixture-mounted use depending on the workshop application.

ECONOMY LINE build quality. Hardened and ground reference surfaces and contact points for repeatable measurements; matched to Schut precision quality class. The instrument is designed for handheld or fixture-mounted use depending on the workshop application, and integrates with standard inspection workflows in metrology labs and machine shop QC stations.

Usage: position the instrument against the workpiece’s reference surface or feature, and perform the measurement according to the instrument’s standard procedure (depending on type — direct reading, comparative deviation, go/no-go verification, or wrung-stack reference). Zero-verify against a setting standard during periodic verification and document with a calibration certificate. The instrument’s design supports both one-off inspection and back-to-back QC workflows.

Common applications: workshop incoming inspection of components, on-machine setup checks, fitter and toolmaker bench measurements, calibration lab reference work, and QC workflows within the Schut product line. The MICROMETER ACCESSORIES category is the standard workshop tool for the measurement/reference task this product covers.

Features

  • Cast steel stand for micrometers
  • Hardened, ground reference surfaces for repeatable measurements
  • Schut build quality
  • Suitable for workshop QC, calibration lab, and bench measurement applications
  • ECONOMY LINE series

Specifications

Manufacturer Schut
Series ECONOMY LINE
Type Micrometer stands
Article number 64-908983

Compatible accessories

Compatible accessories: Schut setting standards and reference standards for periodic verification of accuracy at known dimensions; calibration certificates (ISO 17025) upon initial delivery and during periodic verification — typically a 12-month interval for production floors, 6 months for high-volume inspection chains; Schut protective cases and bench storage; Schut spare parts and consumables where applicable.

Additional information
Weight 0,723 kg
Clamping Range mm

4 – 12

Weight kg

7

Inclination
Variants

64-906212,64-907152

Variant Properties

clamping_range_mm,weight_kg

Specification

Cast steel stand for micrometers is a Schut precision instrument from the ECONOMY LINE series — used for workshop measurement, inspection, and reference work in machine shop and manufacturing environments. Hardened and ground reference surfaces ensure repeatable measurements; the instrument is designed for handheld or fixture-mounted use depending on the workshop application.

ECONOMY LINE build quality. Hardened and ground reference surfaces and contact points for repeatable measurements; matched to Schut precision quality class. The instrument is designed for handheld or fixture-mounted use depending on the workshop application, and integrates with standard inspection workflows in metrology labs and machine shop QC stations.

Usage: position the instrument against the workpiece’s reference surface or feature, and perform the measurement according to the instrument’s standard procedure (depending on type — direct reading, comparative deviation, go/no-go verification, or wrung-stack reference). Zero-verify against a setting standard during periodic verification and document with a calibration certificate. The instrument’s design supports both one-off inspection and back-to-back QC workflows.

Common applications: workshop incoming inspection of components, on-machine setup checks, fitter and toolmaker bench measurements, calibration lab reference work, and QC workflows within the Schut product line. The MICROMETER ACCESSORIES category is the standard workshop tool for the measurement/reference task this product covers.

Features

  • Cast steel stand for micrometers
  • Hardened, ground reference surfaces for repeatable measurements
  • Schut build quality
  • Suitable for workshop QC, calibration lab, and bench measurement applications
  • ECONOMY LINE series

Specifications

Manufacturer Schut
Series ECONOMY LINE
Type Micrometer stands
Article number 64-908983

Compatible accessories

Compatible accessories: Schut setting standards and reference standards for periodic verification of accuracy at known dimensions; calibration certificates (ISO 17025) upon initial delivery and during periodic verification — typically a 12-month interval for production floors, 6 months for high-volume inspection chains; Schut protective cases and bench storage; Schut spare parts and consumables where applicable.

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *