Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%See the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%See the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticed
Item number 64-852441

Käfer needle insert for dial indicator, d=1.5 mm l=16 mm, thread M2.5, steel

89 DKK

In stock

Precision-formed needle probe with a 1.5 mm diameter and 16 mm length. This narrow-tip measuring probe is ideal for precise measurements in tight spaces and hard-to-reach areas. Perfect for quality control and precision work in industry and manufacturing where exact measurement values are required.

Request a quote 64-852441

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Käfer insert needle-shaped probe d=1.5 mm, l=16 mm is a Schut-supplied precision instrument from the ECONOMY LINE series, length 16 mm.

ECONOMY LINE build quality. Material: steel. Hardened, ground reference surfaces for repeatable measurement; matches Käfer precision quality. Size suitable for handheld or fixture-mounted use depending on the workshop application.

Usage: position the instrument against the workpiece reference surface, perform the measurement according to the instrument’s standard procedure (depending on type — direct reading, comparative deviation, or go/no-go verification), and record the result. Zero-verify against the setting standard during periodic verification. Document with a calibration certificate.

Common applications: workshop measurement, incoming inspection of components, on-machine setup checks, fitter and toolmaker bench measurement, calibration lab reference work, and QC workflows within the Käfer product line.

Features

  • Käfer insert needle-shaped probe d=1.5 mm, l=16 mm
  • Length 16 mm
  • Material: steel
  • Hardened, ground reference surfaces
  • Käfer build quality
  • ECONOMY LINE series

Specifications

Manufacturer Käfer
Series ECONOMY LINE
Type Käfer inserts – Needle-shaped probes
Length 16 mm
Material steel
Article number 64-852441

Compatible accessories

Compatible accessories: Käfer setting standards and reference standards for periodic verification, calibration certificates (ISO 17025), Käfer protective cases and bench storage, Käfer spare parts and consumables (where applicable).

Additional information
Weight 0,001 kg
Specification

Käfer insert needle-shaped probe d=1.5 mm, l=16 mm is a Schut-supplied precision instrument from the ECONOMY LINE series, length 16 mm.

ECONOMY LINE build quality. Material: steel. Hardened, ground reference surfaces for repeatable measurement; matches Käfer precision quality. Size suitable for handheld or fixture-mounted use depending on the workshop application.

Usage: position the instrument against the workpiece reference surface, perform the measurement according to the instrument’s standard procedure (depending on type — direct reading, comparative deviation, or go/no-go verification), and record the result. Zero-verify against the setting standard during periodic verification. Document with a calibration certificate.

Common applications: workshop measurement, incoming inspection of components, on-machine setup checks, fitter and toolmaker bench measurement, calibration lab reference work, and QC workflows within the Käfer product line.

Features

  • Käfer insert needle-shaped probe d=1.5 mm, l=16 mm
  • Length 16 mm
  • Material: steel
  • Hardened, ground reference surfaces
  • Käfer build quality
  • ECONOMY LINE series

Specifications

Manufacturer Käfer
Series ECONOMY LINE
Type Käfer inserts – Needle-shaped probes
Length 16 mm
Material steel
Article number 64-852441

Compatible accessories

Compatible accessories: Käfer setting standards and reference standards for periodic verification, calibration certificates (ISO 17025), Käfer protective cases and bench storage, Käfer spare parts and consumables (where applicable).

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *