Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One Instrument
Item number 64-852425

Käfer flat insert for dial indicator, d=6.0 mm l=12 mm, thread M2.5, TC

289 DKK

In stock

12 mm ball probe with 6 mm shank, specifically designed for precision applications in measurement and inspection. Ideal for meticulous quality control, surface verification, and dimensional inspection. Designed for durability and reliability in both industrial and laboratory environments.

Request a quote 64-852425

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Käfer insert ball probe d=6.0 mm, l=12 mm TC is a Schut-supplied precision instrument from the ECONOMY LINE series, length 12 mm.

ECONOMY LINE build quality. Material: tungsten carbide (TC). Hardened, ground reference surfaces for repeatable measurement; matches Käfer precision quality. Size suitable for handheld or fixture-mounted use depending on the workshop application.

Usage: position the instrument against the workpiece reference surface, perform the measurement according to the instrument’s standard procedure (depending on type — direct reading, comparative deviation, or go/no-go verification), and record the result. Zero-verify against a setting standard during periodic verification. Document with a calibration certificate.

Common applications: workshop measurement, incoming inspection of components, on-machine setup checks, fitter and toolmaker bench measurement, calibration lab reference work, and QC workflows within the Käfer product line.

Features

  • Käfer insert ball probe d=6.0 mm, l=12 mm TC
  • Length 12 mm
  • Material: tungsten carbide (TC)
  • Hardened, ground reference surfaces
  • Käfer build quality
  • ECONOMY LINE series

Specifications

Manufacturer Käfer
Series ECONOMY LINE
Type Käfer inserts – Ball probes
Length 12 mm
Material tungsten carbide (TC)
Article number 64-852425

Compatible accessories

Compatible accessories: Käfer setting standards and reference standards for periodic verification, calibration certificates (ISO 17025), Käfer protective cases and bench storage, Käfer spare parts and consumables (where applicable).

Additional information
Weight 0,002 kg
Specification

Käfer insert ball probe d=6.0 mm, l=12 mm TC is a Schut-supplied precision instrument from the ECONOMY LINE series, length 12 mm.

ECONOMY LINE build quality. Material: tungsten carbide (TC). Hardened, ground reference surfaces for repeatable measurement; matches Käfer precision quality. Size suitable for handheld or fixture-mounted use depending on the workshop application.

Usage: position the instrument against the workpiece reference surface, perform the measurement according to the instrument’s standard procedure (depending on type — direct reading, comparative deviation, or go/no-go verification), and record the result. Zero-verify against a setting standard during periodic verification. Document with a calibration certificate.

Common applications: workshop measurement, incoming inspection of components, on-machine setup checks, fitter and toolmaker bench measurement, calibration lab reference work, and QC workflows within the Käfer product line.

Features

  • Käfer insert ball probe d=6.0 mm, l=12 mm TC
  • Length 12 mm
  • Material: tungsten carbide (TC)
  • Hardened, ground reference surfaces
  • Käfer build quality
  • ECONOMY LINE series

Specifications

Manufacturer Käfer
Series ECONOMY LINE
Type Käfer inserts – Ball probes
Length 12 mm
Material tungsten carbide (TC)
Article number 64-852425

Compatible accessories

Compatible accessories: Käfer setting standards and reference standards for periodic verification, calibration certificates (ISO 17025), Käfer protective cases and bench storage, Käfer spare parts and consumables (where applicable).

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *