Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%See the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%See the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticed
Item number 64-855626

Lever-type dial test indicator with changeable measuring direction, parallel, dial diameter Ø35 mm, measuring range 1 mm

Original price was: 1.351 DKK.Current price is: 1.323 DKK.

In stock

Lever-type dial test indicator with changeable measuring direction
Parallel
Dial diameter Ø35 mm
Measuring range 1 mm

Request a quote 64-855626

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

A lever-type dial test indicator is a dial gauge with an angled probe lever. It is used to check flatness, run-out and parallelism on surfaces that a standard dial gauge cannot reach. The measuring direction of this model can be changed, so the lever can be adapted to the measuring task.

Typical workshop uses are aligning workpieces in machines and inspection on the measuring table.

  • Type: lever-type dial test indicator, parallel
  • Changeable measuring direction
  • Dial diameter: Ø35 mm
  • Measuring range: 1 mm
Additional information
Weight 0,145 kg
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *