Granite measuring plate, dimensions 900x600x100 mm, weight 188 kg, accuracy according to DIN 876/1
7.027 DKK
High-quality granite surface plate with dimensions of 900×600 mm. Perfect for precision work in measurement and inspection. The flat, stable surface provides an exact reference point for various measurements. Ideal for workshops, laboratories, and manufacturing environments where accuracy is critical.
Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%
- Gratis fragt over 3.000 kr. ekskl. moms
- Hand-held and bench measuring equipment from Mahr
Description
The 900×600×100 mm granite measuring table, DIN 876/1, is the fundamental reference for any precision inspection bench — the dead-flat surface against which everything else is measured. DIN 876/1 is the inspection quality tolerance class: flatness within a few micrometers across the entire table, with the ground working surface allowing gauge blocks to be wrung directly against it for primary length references.
Granite is the right material for a measuring table for three reasons: thermal stability (approximately 1/3 of steel’s coefficient of expansion, so the table does not drift through workshop temperature fluctuations), non-magnetic (it does not pick up stray fields from nearby chucks or magnetic indicator stands), and “self-witnessing” — a damaged granite table shows a nick rather than a smooth bulge, so wear is visible and measurable rather than creeping.
Use the table as a reference floor for height gauge work, gauge block stack calibration, squareness checks with a steel square (e.g., 64-402145), parallel packing under fixtures, and as a datum for any 1D scanning measurement. Pair with the 64-402196 family of table stands or a dedicated granite stand for stable bench mounting.
Features
- Granite measuring table, 900×600×100 mm
- DIN 876/1 — inspection grade
- Polished, ground working surface — gauge blocks wring directly against it
- Non-magnetic, thermally stable, dimensionally stable through workshop temperature fluctuations
- Self-witnessing wear: nicks rather than smooth bulges
Specifications
| Material | Granite |
|---|---|
| Standard | DIN 876/1 (inspection grade) |
| Dimensions | 900×600×100 mm |
| Article number | 64-402006 |
Additional information
| Weight | 188,003 kg |
|---|
Specification
The 900×600×100 mm granite measuring table, DIN 876/1, is the fundamental reference for any precision inspection bench — the dead-flat surface against which everything else is measured. DIN 876/1 is the inspection quality tolerance class: flatness within a few micrometers across the entire table, with the ground working surface allowing gauge blocks to be wrung directly against it for primary length references.
Granite is the right material for a measuring table for three reasons: thermal stability (approximately 1/3 of steel’s coefficient of expansion, so the table does not drift through workshop temperature fluctuations), non-magnetic (it does not pick up stray fields from nearby chucks or magnetic indicator stands), and “self-witnessing” — a damaged granite table shows a nick rather than a smooth bulge, so wear is visible and measurable rather than creeping.
Use the table as a reference floor for height gauge work, gauge block stack calibration, squareness checks with a steel square (e.g., 64-402145), parallel packing under fixtures, and as a datum for any 1D scanning measurement. Pair with the 64-402196 family of table stands or a dedicated granite stand for stable bench mounting.
Features
- Granite measuring table, 900×600×100 mm
- DIN 876/1 — inspection grade
- Polished, ground working surface — gauge blocks wring directly against it
- Non-magnetic, thermally stable, dimensionally stable through workshop temperature fluctuations
- Self-witnessing wear: nicks rather than smooth bulges
Specifications
| Material | Granite |
|---|---|
| Standard | DIN 876/1 (inspection grade) |
| Dimensions | 900×600×100 mm |
| Article number | 64-402006 |

There are no reviews yet.