Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One Instrument
Item number 64-527201

Mitutoyo analog depth vernier caliper 0-150 mm/0.05

1.453 DKK

In stock

Precision depth gauge with a measuring range of 0–150 mm and a reading accuracy of 0.05 mm. A perfect tool for accurate measurements of depth in holes, grooves, and other recesses. Ideal for use in workshops, quality control, and precision manufacturing where reliable measurement results are critical.

Request a quote 64-527201

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Mitutoyo depth caliper – Vernier 0.05 mm is a Mitutoyo precision instrument from the ECONOMY series — used for workshop measurement, inspection, and reference work in machine shop and manufacturing environments. Measuring range 0-150 mm. Hardened and ground reference surfaces provide repeatable measurements; the instrument is designed for handheld or fixture-mounted use depending on the workshop application.

Hardened and ground reference surfaces and contact points for repeatable measurements; matched to Mitutoyo precision quality class. The instrument integrates with standard inspection workflows in metrology labs and machine shop QC stations.

Usage: position the instrument against the workpiece reference surface or feature, perform the measurement according to the instrument’s standard procedure (depending on type — direct reading, comparative deviation, go/no-go verification, or wrung-stack reference). Zero-verify against a setting standard during periodic verification. Document with a calibration certificate. The instrument’s design supports both one-off inspection and back-to-back QC workflows; its hardened reference surfaces resist wear from regular workshop use over years of service.

Common applications: workshop incoming inspection of components, on-machine setup checks, fitter and toolmaker bench measurement, calibration lab reference work, and QC workflows within the Mitutoyo product line where this instrument’s specific role is applicable. The DEPTH CALIPERS category is the standard workshop tool for measurement/reference tasks.

Features

  • Mitutoyo depth caliper – Vernier 0.05 mm
  • Measuring range 0-150 mm
  • Hardened, ground reference surfaces for repeatable measurements
  • Mitutoyo build quality
  • Suitable for workshop QC, calibration lab, and bench measurement applications

Specifications

Manufacturer Mitutoyo
Type Mitutoyo depth calipers
Measuring range 0-150 mm
Article number 64-527201

Compatible accessories

Compatible accessories: Mitutoyo setting standards and reference standards for periodic verification of accuracy at known dimensions; calibration certificates (ISO 17025) at initial delivery and periodic verification — typically 12-month interval for production floors, 6-month for high-volume lines; Mitutoyo protective cases and bench storage; Mitutoyo spare parts and consumables where applicable.

Additional information
Weight 0,261 kg
Measuring range

0-150 mm

Vernier

05 mm

Variants

64-527201,64-527202,64-527203,64-527121,64-527122,64-527123

Variant Properties

measuring_range,vernier

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *