Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference Furnace
Item number 65-141330207

20-220 mm digital outside caliper, microprocessor, 0.005 mm resolution

4.564 DKK

In stock
Request a quote 65-141330207

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Digital vernier caliper with 20-220 mm measuring range, 0.005 mm resolution, wireless data output, touchscreen, innovative MICS functions

This measuring instrument is particularly suitable for measuring external grooves. Accurate reading of measurement results with a resolution of 0.005 mm. High precision with an accuracy of 0.025 mm. A microcomputer with a touchscreen is installed in the standard display of the vernier caliper, via which software functions can be accessed. The measuring instrument has IP 54 protection. Dust and splash-proof. The handcrafted measuring jaw guarantees good precision. The unit uses a rechargeable battery. This eliminates the need for constant battery replacement. Supplied with a calibration certificate according to ISO 17025.

MICS Microcomputer System – Industry 4.0 ready!!

Microtech’s innovative computer-aided MICS system takes measuring equipment to the next level. The system is equipped with a touchscreen and extensive software functions, leaving nothing to be desired.

The display features a clearly readable touchscreen. A user-friendly menu ensures simple menu navigation. Up to 100 measured values can be stored via the internal memory. Statistics can be used to read off min., max. and average values.

The resolution with the MICS system can be up to 0.0001 mm. GO/NoGO values can be displayed in color (green for GO / red for NoGO). Reading of MIN/MAX VALUES. Calculation formulas can be entered via the formula mode and then evaluated. Ambient temperatures can be incorporated into the measurement result via temperature compensation for 7 different materials. The MICS system makes it possible to enter mathematical error corrections. Depending on the working direction, the display can be rotated. The calibration date can be stored in the software, eliminating the need for an external date search. The wireless data transfer can be triggered via a timer, via the touchscreen, or with the button.

Measuring instruments with the MICS system are supplied with free basic software for Windows, Android, and iOS. Extended functionality can be achieved via a fee-based update.

The MICS software in detail:

  • Go/NoGo (with color coding)
  • Max/min,
  • Storage for up to 100 measured values.
  • Statistics,
  • Timer,
  • Formulas,
  • mm/inch,
  • Offset function,
  • Calibration date,
  • Lock
  • Mathematical and temperature compensation
  • Turn off
  • Brightness
  • Rotation,
  • Rechargeable Li-Po battery

Technical data:

  • Manufacturer: Microtech
  • Order number: 141330207
  • Product: Vernier caliper
  • Measuring range: 20-220
  • Resolution: 0.005 mm
  • Data output: WiFi
  • with touchscreen
  • MICS system with extensive software functions
  • Accuracy: 0.025 mm
  • Protection class: IP 54
  • Including calibration certificate according to ISO 17025
  • Design: digital
  • Handmade measuring jaws
  • with microcomputer and extensive software
  • Rechargeable battery
  • is particularly suitable for: measuring external grooves
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *