Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference Furnace
Item number 65-142515141

0-1500 mm digital mounted vernier caliper, wireless, microprocessor, 0.001 mm resolution

12.585 DKK

In stock
Request a quote 65-142515141

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Digital vernier caliper with measuring range 0-1500 mm, 0.001 mm resolution, wireless data output, touchscreen, extensive software functions

Reliable reading of measured values with a resolution of 0.001 mm. High precision with 0.04 mm accuracy. Instead of the standard display when the slide is attached, a microcomputer with a touchscreen is installed, via which the software functions can be accessed. Handmade measuring jaws ensure good precision. The unit uses a rechargeable battery. This eliminates the need for continuous battery replacement. The vernier caliper is delivered with a calibration certificate according to ISO 17025.

MICS Microcomputer System – Industry 4.0 ready!!

Microtech’s groundbreaking computer-aided MICS system takes measuring tools to the next level. The system is equipped with a touchscreen and many software functions and leaves no room for alternatives.

The display is via a clearly readable touchscreen. A user-friendly menu ensures simple menu navigation. Up to 100 measured values can be stored via the internal memory. The statistics can be used to retrieve min, max, and average values.

The resolution with the MICS system can be up to 0.0001 mm. Color representation of GO/NoGO values. Reading of MIN/MAX values. The form mode makes it possible to enter calculation formulas with corresponding evaluation. Ambient temperatures can be incorporated into the measurement result via temperature compensation for 7 different materials. For some measurements, it is necessary to include a mathematical error correction, which is also possible with the microcomputer system. The display can be rotated in all directions, depending on the working direction. The calibration date can be integrated into the software; an external date search is not necessary. The wireless data transfer can be triggered via a timer, touchscreen, or button.

Measuring tools with the MICS system are delivered with free basic software for Windows, Android, and iOS. Extended functionality can be achieved via a fee-based update.

The MICS software in detail:

  • Go/NoGo (with color coding)
  • Max/min,
  • Storage for up to 100 measured values.
  • Statistics,
  • Timer,
  • Formulas,
  • mm/inch,
  • Offset function,
  • Calibration date,
  • Lock
  • Mathematical and temperature compensation
  • Switch off
  • Brightness
  • Rotation,
  • Rechargeable Li-Po battery

Technical data:

  • Manufacturer: Microtech
  • Order number: 142515141
  • Product: Vernier caliper installation
  • Measuring range: 0-1500
  • Resolution: 0.001 mm
  • Data output: WiFi
  • With touchscreen
  • MICS system with extensive software functions
  • Accuracy: 0.04 mm
  • Including calibration certificate according to ISO 17025
  • Design: digital
  • Handmade measuring jaws
  • With microcomputer and extensive software
  • Rechargeable battery
  • Material: stainless steel
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *