Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%See the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%See the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticed
Item number 82-M-820-S

Monocular and Magnifier with Near Focus, Specwell M-820-S. Magnification 25x

2.861 DKK

In stock
Request a quote 82-M-820-S

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category: ,

Description

Specwell M-820-S Monocular loupe / viewer with extra near-focus lens and reticle scale with graduations of 0.1, 0.05, and 0.2 mm. Can be used either as a loupe or as a viewer. Popular for industrial applications in quality control and inspection.

When using this product as a viewer, objects can be seen sharply at a minimum working distance of 300 mm.

The near-focus lens and acrylic base can be easily screwed onto the monocular, resulting in an excellent loupe with a field of view of 9 mm and a magnification of 25x. A cutout in the clear base provides access to touch the object during inspection. The base can be removed for irregular surfaces. The image is right-side up. Both lens systems (eyepiece and objective lens) are achromatic and have an anti-reflection coating.

The use of this loupe in combination with the near-focus lens is not limited to technical applications. Due to its high light sensitivity, true image, and magnification factor, it is also an excellent visual aid. A case and neck strap are included.

Magnification 8x (monocular)
25x (as loupe)
Focusable Yes
Scale Yes
Top increment

0.1 and 0.05 mm

Bottom increment

0.2 mm

Working distance

5 mm

Working distance (min.) 300 mm (loupe)
70 mm (loupe)
Field of view, loupe Distance 1000 meters = 113 meters
Distance 300 mm = 25 mm
Field of view with close-up lens 9 mm (loupe, LS)
Size 91 x 32 mm (loupe)
172 x 45 mm (loupe)
Weight 76 grams (monocular)
110 grams (loupe)
Leather case Included
Display Upright image
Lens aperture 20 mm
Field angle 6.5 °
Relative brightness 6.2
Exit pupil diameter 2.5 mm

 

Specification

Specwell M-820-S Monocular loupe / viewer with extra near-focus lens and reticle scale with graduations of 0.1, 0.05, and 0.2 mm. Can be used either as a loupe or as a viewer. Popular for industrial applications in quality control and inspection.

When using this product as a viewer, objects can be seen sharply at a minimum working distance of 300 mm.

The near-focus lens and acrylic base can be easily screwed onto the monocular, resulting in an excellent loupe with a field of view of 9 mm and a magnification of 25x. A cutout in the clear base provides access to touch the object during inspection. The base can be removed for irregular surfaces. The image is right-side up. Both lens systems (eyepiece and objective lens) are achromatic and have an anti-reflection coating.

The use of this loupe in combination with the near-focus lens is not limited to technical applications. Due to its high light sensitivity, true image, and magnification factor, it is also an excellent visual aid. A case and neck strap are included.

Magnification 8x (monocular)
25x (as loupe)
Focusable Yes
Scale Yes
Top increment

0.1 and 0.05 mm

Bottom increment

0.2 mm

Working distance

5 mm

Working distance (min.) 300 mm (loupe)
70 mm (loupe)
Field of view, loupe Distance 1000 meters = 113 meters
Distance 300 mm = 25 mm
Field of view with close-up lens 9 mm (loupe, LS)
Size 91 x 32 mm (loupe)
172 x 45 mm (loupe)
Weight 76 grams (monocular)
110 grams (loupe)
Leather case Included
Display Upright image
Lens aperture 20 mm
Field angle 6.5 °
Relative brightness 6.2
Exit pupil diameter 2.5 mm

 

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *