Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolutionVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolution
Item number 82-M-1020-LS

Monocular and Loupe with Near Focus, Specwell M-1020-LS. Magnification 30x

2.190 DKK

In stock
Request a quote 82-M-1020-LS

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category: ,

Description

Specwell M-1020-LS Monocular with near-focus lens and short acrylic base. Can be used either as a loupe or as a monocular. Popular for industrial applications in quality control and inspection.

When using this product as a monocular, objects can be seen sharply at a minimum working distance of 400 mm.

The near-focus lens and acrylic base can be easily screwed onto the monocular, resulting in an excellent loupe with a field of view of 8 mm and a magnification of 30x. A cutout in the clear base provides access to touch the object during inspection. The base can be removed for irregular surfaces. The image is upright. Both lens systems (eyepiece and objective lens) are achromatic and have an anti-reflection coating.

The use of this loupe in combination with the near-focus lens is not limited to technical applications. Due to its high light sensitivity, true-to-life image, and magnification factor, it is also an excellent visual aid. A case and neck strap are included.

Alternative model M-1020-KS is the same loupe with a short acrylic base that offers higher magnification when used as a loupe.

Magnification 10x (loupe)
distance 400 mm = 18x
30x (loupe LS)
Focusable Yes
Scale No
Working distance (min.) 400 mm (loupe)
66 mm (loupe)
Field of view, loupe Distance 1000 meters = 105 meters
Distance 400 mm = 25 mm
Field of view near-focus lens 8 mm (loupe, LS)
Size 106 x 32 mm (loupe)
233 x 45 mm (loupe LS)
Weight 170 grams (monocular)
238 grams (loupe)
Leather case Included
Display Upright image
Aperture 20 mm
Field of view 6 °
Relative brightness 4
Exit pupil diameter 2 mm

 

Specification

Specwell M-1020-LS Monocular with near-focus lens and short acrylic base. Can be used either as a loupe or as a monocular. Popular for industrial applications in quality control and inspection.

When using this product as a monocular, objects can be seen sharply at a minimum working distance of 400 mm.

The near-focus lens and acrylic base can be easily screwed onto the monocular, resulting in an excellent loupe with a field of view of 8 mm and a magnification of 30x. A cutout in the clear base provides access to touch the object during inspection. The base can be removed for irregular surfaces. The image is upright. Both lens systems (eyepiece and objective lens) are achromatic and have an anti-reflection coating.

The use of this loupe in combination with the near-focus lens is not limited to technical applications. Due to its high light sensitivity, true-to-life image, and magnification factor, it is also an excellent visual aid. A case and neck strap are included.

Alternative model M-1020-KS is the same loupe with a short acrylic base that offers higher magnification when used as a loupe.

Magnification 10x (loupe)
distance 400 mm = 18x
30x (loupe LS)
Focusable Yes
Scale No
Working distance (min.) 400 mm (loupe)
66 mm (loupe)
Field of view, loupe Distance 1000 meters = 105 meters
Distance 400 mm = 25 mm
Field of view near-focus lens 8 mm (loupe, LS)
Size 106 x 32 mm (loupe)
233 x 45 mm (loupe LS)
Weight 170 grams (monocular)
238 grams (loupe)
Leather case Included
Display Upright image
Aperture 20 mm
Field of view 6 °
Relative brightness 4
Exit pupil diameter 2 mm

 

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *