Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolutionVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolution
Item number 43-AM7515MZT1P

Dino-Lite EDGE, 5 Megapixels, Long Working Distance, Laser Pointer, Measurement Function, Automatic Magnification Reading, FLC, Polarizer, Metal

8.789 DKK

In stock
Request a quote 43-AM7515MZT1P

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category: ,

Other models in the series 16

Description
  • AMR (Automatic Magnification Reading)
  • FLC (Flexible Light Control)
  • APL

The AM7515MZT1P is integrated with the Aim Point Laser (APL), facilitating the localization and focusing of the target under the microscope. The AM7515MZT1P is a 5MP microscope with a 70-140x magnification range, featuring AMR, FLC, APL, a metal housing, and a polarizer.


USB5 megapixel EDOFAMR PolariserFLCexch-cap


The AM7515MZT1P is part of the universal series, and with its standard working distance and wide magnification range of 70-140x, it is suitable for a broad spectrum of applications. Due to the built-in polarization filter, this model is ideal when working with shiny or reflective objects such as metal, plastic, glass, jewelry, electronics, etc. The AMR function is particularly important when measurement functions are used frequently.

The Aim Point Laser (APL) is an integrated beam laser that projects a red dot, providing a visual reference point for positioning and focusing the target.

The main features of the 43-AM7515MZT1P are:

• 5-megapixel edge sensor
• 70-140x magnification
• Integrated polarizer
• Aluminum housing
• Automatic magnification reading (AMR)
• Flexible LED control (FLC)
• Sighting laser (apl)
• Comprehensive measuring functions
• Calibration
• Replaceable front caps •
And more…


MAGNIFICATION WORKING DISTANCE 1 WORKING DISTANCE 2* FIELD OF VIEW (X) FIELD OF VIEW (Y) DEPTH OF FIELD
Listed values may vary slightly   * Without front cover     Unit = mm
130 – 4.5 3.0 2.2 –
140 – 5.0 2.8 2.1 –
150 – 5.6 2.6 1.9 –
160 – 6.3 2.4 1.8 –
170 – 7.1 2.3 .17 –
180 – 8.0 2.2 1.6 –
190 – 8.9 2.1 1.5 –
200 – 9.9 2.0 1.5 –
210 – 10.9 1.9 1.4 –
220 – 11.9 1.8 1.3 0.1
Listed values may vary slightly   * Without front cover     Unit = mm

Illumination
Light/LED type White
Number of LEDs 8
LED on/off switchable: Yes
Infrared filter IR cut filter >650 nm
Diffuser available Yes (N3C-D included)
Emission filter No
Polarizer Yes, linear
Laser pointer 656nm laser diode
Optics
Magnification 70-140x
Macro zoom No
Working distance Standard
Lens type Glass with anti-reflection coating
Sensor
Sensor type CMOS
Resolution 5 Megapixel (2592×1944)
Max image frame rate 30 fps
Compatibility
Interface USB 2.0
Operating system Windows 7, 8, 10 and 11, MacOS 10.14 and later
Software DinoCapture 2.0 (Windows), DinoXcope (Mac OS)
Supported image formats (Windows) BMP, GIF, PNG, JPG, TIF, RAS, PNM, TGA, PCX, MNG, WBMP, JP2, JPC, PGX
Supported video formats (Windows) WMV, FLV, SWF
Supported image formats (MacOS) JPEG, PNG
Supported video formats (MacOS) MOV (max 1.3 MP)
Image standards DirectShow, UVC
Wifi Wireless ready, requires WF-10 WiFi streamer (optional)
Housing
Body material Metal housing
Dimensions 10.7 cm (L) x 3.2 cm (D)
Weight 140g
Cable length 1.8 m
Features
Special feature Automatic magnification reading (AMR), flexible LED control (FLC). AIM pointer laser (apl)
Measurement Yes
Calibration Yes
Microtouch sensor Yes
ESD-safe Yes
Information
Package contents Microscope, carrying bag, calibration target, user manual, N3C-O- open cover, N3C-C- closed cover, N3C-D- diffuser cover, N3C-E- extension cover, N3C-L- long cover, N3C-S- side light cover
Warranty information 2-year European warranty
Certifications: CE, FCC, ROHS
Additional information
Focus distance

Connection

Function 1

Function 2

Function 3

Metal housing

Resolution

Magnification

PDF (2)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *