Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the thermometer reads 3.0 °C but the product is at 5.5 °C: how to check your thermocouples at three pointsThe temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the thermometer reads 3.0 °C but the product is at 5.5 °C: how to check your thermocouples at three pointsThe temperature was fine at the inspection, but what happened overnight?Air Temperature Is Not Product Temperature: How to Monitor a Refrigerator So the Reading Can Be TrustedSee the fault inside the pipe before you tear up the floor: 30-meter camera probe for pipes and hidden cavitiesThe Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handle
Item number 64-832425

LMW setting ring in hardened steel according to DIN 2250 form C, 17 mm, size indication to three decimal places

542 DKK

In stock

Precision setting ring with a 17 mm diameter for calibrating measuring instruments. Manufactured with high accuracy to ensure exact measurement results. Ideal for workshops and laboratories where precision is critical. A reliable reference tool for quality control and metrological applications.

Request a quote 64-832425

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

LMW setting ring, ø17 mm is an LMW setting ring — a hardened, ground cylindrical ring with a precision-ground internal diameter, used as a reference standard for zero-calibration of two-point internal measuring instruments, hole gauges, and similar measuring systems.

DIN 2250 form C compatible. The ring is hardened and ground to class tolerance; the accompanying calibration document provides a traceable reference diameter for the QC chain. Standard workflow: zero the instrument against the ring’s nominal diameter, then measure the workpiece — the ring’s dimensional stability determines measurement accuracy.

Usage: wipe the ring’s internal surface, insert the measuring instrument’s head into the ring until two-point contact is felt, zero the meter, then remove the head and perform the measurement on the workpiece. Periodic verification of the ring itself should be performed at calibration certificate issuance intervals (typically 12 months).

Common applications: zero-calibration of Schwenk, Kræplin, and similar two-point internal measuring instruments; periodic verification of hole gauge accuracy in calibration laboratories; reference standard for shop floor QC chains handling bore acceptance measurement.

Features

  • LMW setting ring, ø17 mm
  • DIN 2250 form C compatible
  • Hardened, ground reference surfaces for repeatable measurement
  • LMW build quality
  • Suitable for shop floor QC, calibration labs, and bench measurement applications

Specifications

Manufacturer LMW
Type LMW setting rings
Standard DIN 2250 form C
Article number 64-832425

Compatible accessories

Compatible accessories: LMW setting standards and reference standards for periodic verification of accuracy at known dimensions; calibration certificates (ISO 17025) at first delivery and for periodic verification — typically 12-month intervals for production floors, 6-month intervals for high-volume chains; LMW protective cases and bench storage; LMW spare parts and consumables where applicable.

Additional information
Weight 0,128 kg
Specification

LMW setting ring, ø17 mm is an LMW setting ring — a hardened, ground cylindrical ring with a precision-ground internal diameter, used as a reference standard for zero-calibration of two-point internal measuring instruments, hole gauges, and similar measuring systems.

DIN 2250 form C compatible. The ring is hardened and ground to class tolerance; the accompanying calibration document provides a traceable reference diameter for the QC chain. Standard workflow: zero the instrument against the ring’s nominal diameter, then measure the workpiece — the ring’s dimensional stability determines measurement accuracy.

Usage: wipe the ring’s internal surface, insert the measuring instrument’s head into the ring until two-point contact is felt, zero the meter, then remove the head and perform the measurement on the workpiece. Periodic verification of the ring itself should be performed at calibration certificate issuance intervals (typically 12 months).

Common applications: zero-calibration of Schwenk, Kræplin, and similar two-point internal measuring instruments; periodic verification of hole gauge accuracy in calibration laboratories; reference standard for shop floor QC chains handling bore acceptance measurement.

Features

  • LMW setting ring, ø17 mm
  • DIN 2250 form C compatible
  • Hardened, ground reference surfaces for repeatable measurement
  • LMW build quality
  • Suitable for shop floor QC, calibration labs, and bench measurement applications

Specifications

Manufacturer LMW
Type LMW setting rings
Standard DIN 2250 form C
Article number 64-832425

Compatible accessories

Compatible accessories: LMW setting standards and reference standards for periodic verification of accuracy at known dimensions; calibration certificates (ISO 17025) at first delivery and for periodic verification — typically 12-month intervals for production floors, 6-month intervals for high-volume chains; LMW protective cases and bench storage; LMW spare parts and consumables where applicable.

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *