Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolutionVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolution
Item number 64-907184

Scratch caliper with round stem and mm scale, measuring range 0-300 mm, vernier 0.1 mm, without fine adjustment

450 DKK

In stock

Practical 300mm marking ruler for precise marking on various materials. Perfect for carpentry and other precision work where exact dimensions and straight lines are essential. An indispensable tool for both professionals and DIY enthusiasts who value precision in their projects.

Request a quote 64-907184

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Marking gauge round rod without fine adjustment, 0-300 mm is a Schut precision instrument from the ECONOMY LINE series — used for workshop measurement, inspection, and reference work in machine shop and fabrication environments. Hardened and ground reference surfaces provide repeatable measurements; the instrument is designed for handheld or fixture-mounted use depending on the workshop application.

ECONOMY LINE build quality. Hardened and ground reference surfaces and contact points for repeatable measurements; matched to Schut precision quality class. The instrument is designed for handheld or fixture-mounted use depending on the workshop application, and integrates with standard inspection workflows in metrology labs and machine shop QC stations.

Usage: position the instrument against the workpiece reference surface or feature, perform the measurement according to the instrument’s standard procedure (depending on type — direct reading, comparative deviation, go/no-go verification, or wrung-stack reference). Zero-verify against a setting standard during periodic verification and document with a calibration certificate. The instrument’s design supports both one-off inspection and back-to-back QC workflows.

Common applications: workshop incoming inspection of components, on-machine setup checks, fitter and toolmaker bench measurement, calibration lab reference work, and QC workflows within the Schut product line. The SCRIBING TOOLS category is the standard workshop tool for the measurement/reference task covered by this product.

Features

  • Marking gauge round rod without fine adjustment, 0-300 mm
  • Hardened, ground reference surfaces for repeatable measurements
  • Schut build quality
  • Suitable for workshop QC, calibration lab, and bench measurement applications
  • ECONOMY LINE series

Specifications

Manufacturer Schut
Series ECONOMY LINE
Type Marking gauges
Article number 64-907184

Compatible accessories

Compatible accessories: Schut setting standards and reference standards for periodic verification of accuracy at known dimensions; calibration certificates (ISO 17025) upon initial delivery and during periodic verification — typically a 12-month interval for production floors, 6 months for high-volume inspection chains; Schut protective cases and bench storage; Schut spare parts and consumables where applicable.

Additional information
Weight 0,599 kg
Specification

Marking gauge round rod without fine adjustment, 0-300 mm is a Schut precision instrument from the ECONOMY LINE series — used for workshop measurement, inspection, and reference work in machine shop and fabrication environments. Hardened and ground reference surfaces provide repeatable measurements; the instrument is designed for handheld or fixture-mounted use depending on the workshop application.

ECONOMY LINE build quality. Hardened and ground reference surfaces and contact points for repeatable measurements; matched to Schut precision quality class. The instrument is designed for handheld or fixture-mounted use depending on the workshop application, and integrates with standard inspection workflows in metrology labs and machine shop QC stations.

Usage: position the instrument against the workpiece reference surface or feature, perform the measurement according to the instrument’s standard procedure (depending on type — direct reading, comparative deviation, go/no-go verification, or wrung-stack reference). Zero-verify against a setting standard during periodic verification and document with a calibration certificate. The instrument’s design supports both one-off inspection and back-to-back QC workflows.

Common applications: workshop incoming inspection of components, on-machine setup checks, fitter and toolmaker bench measurement, calibration lab reference work, and QC workflows within the Schut product line. The SCRIBING TOOLS category is the standard workshop tool for the measurement/reference task covered by this product.

Features

  • Marking gauge round rod without fine adjustment, 0-300 mm
  • Hardened, ground reference surfaces for repeatable measurements
  • Schut build quality
  • Suitable for workshop QC, calibration lab, and bench measurement applications
  • ECONOMY LINE series

Specifications

Manufacturer Schut
Series ECONOMY LINE
Type Marking gauges
Article number 64-907184

Compatible accessories

Compatible accessories: Schut setting standards and reference standards for periodic verification of accuracy at known dimensions; calibration certificates (ISO 17025) upon initial delivery and during periodic verification — typically a 12-month interval for production floors, 6 months for high-volume inspection chains; Schut protective cases and bench storage; Schut spare parts and consumables where applicable.

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *