Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolutionVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolution
Item number 64-909305

Setting gauge for threads with 60° flank angle, length 50 mm

478 DKK

In stock

Robust setting standard of 50mm/60ø that guarantees accurate measurements and settings in technical applications. The precision-manufactured standard provides reliable reference points for the calibration and adjustment of various measuring instruments. Perfect for workshops, quality control, and industrial measuring environments where accuracy is critical.

Request a quote 64-909305

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Hardened steel setting standard for threads with 60° flank angle is a thread micrometer accessory — either a setting standard (master gauge for zero-calibration of thread micrometers) or a measuring insert (the contact surface of the micrometer itself matched to the thread form). Both are essential for traceable thread pitch measurement on screws and nuts.

Setting standards are pre-cut threads at known pitch diameters — place it in the micrometer, zero it, then measure the workpiece thread. Measuring inserts have V-shaped or pointed contact surfaces that seat into the thread profile so the micrometer reads the pitch diameter directly. Hardened, ground surfaces; matched to specific thread pitch values.

Usage: for setting standards, place in the micrometer, read the zero value, adjust the micrometer if necessary; for measuring inserts, swap inserts to match the thread pitch and measure over the thread pitch line. Both require matching to a specific thread pitch and tolerance class.

Common applications: calibration of thread micrometers in calibration laboratories, traceable thread QC in manufacturing workshops, master-gauge-based zero-verification chains, and educational applications for thread form instruction.

Features

  • Hardened steel setting standard for threads with 60° flank angle
  • Hardened, ground reference surfaces for repeatable measurement
  • Schut build quality
  • Suitable for workshop QC, calibration labs and bench measurement applications
  • ECONOMY LINE series

Specifications

Manufacturer Schut
Series ECONOMY LINE
Type Screw thread micrometers – Setting standards
Article number 64-909305

Compatible accessories

Compatible accessories: Schut setting standards and reference standards for periodic verification of accuracy at known dimensions; calibration certificates (ISO 17025) upon first delivery and periodic verification — typically 12-month interval for production floors, 6-month for high-volume chains; Schut protective cases and bench storage; Schut spare parts and consumables where applicable.

Additional information
Weight 0,021 kg
Length mm

50

Flank Angle

60

Variants

64-909304,64-909305,64-909306,64-909307,64-909308,64-909309,64-909310,64-909311

Variant Properties

length_mm

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *