Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a second
Item number 65-142305343

0-500 mm aluminum vernier caliper, 0.001 mm resolution, microprocessor, 0.001 mm resolution

12.389 DKK

In stock
Request a quote 65-142305343

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Digital vernier caliper with measuring range 0-500mm, 0.001mm resolution, wireless data transfer, touchscreen, revolutionary software functions

Accurate reading of measurement results with a resolution of 0.001 mm. High measurement reliability with 0.025 mm accuracy. Instead of a standard screen, a microcomputer with a touchscreen is installed. Comprehensive software functions are available. The unit features a measuring force control of 8 N. The measuring force control ensures that a maximum measuring force is always applied, leading to better measurement results. A handcrafted measuring jaw ensures high precision. The unit has a rechargeable battery. This eliminates the need for frequent battery replacement. The caliper is delivered with a calibration certificate according to ISO 17025.

MICS Microcomputer System – Industry 4.0 ready!!

Microtech’s groundbreaking computer-aided MICS system takes the vernier caliper / in-house meter to the next level. The system is equipped with a touchscreen and comprehensive software functions, leaving little to be desired.

The display is a clearly readable touchscreen. An ergonomic menu ensures simple menu navigation. Up to 100 measured values can be stored via the internal memory. The statistics function enables retrieval of min., max. and average values.

The resolution with the MICS system can be up to 0.0001 mm. Color representation of GO/NoGO values. Reading of MIN/MAX values. Calculation formulas can be entered via the formula mode and evaluated thereafter. Ambient temperatures can be incorporated into the measurement result via temperature compensation for 7 different materials. The MICS Microcomputer System allows input of mathematical error corrections. The display can be rotated in all directions, depending on the working direction. The calibration date can be integrated into the software; an external date search is not necessary. The wireless data transfer can be triggered via a timer, touchscreen, or button.

For measuring tools with the MICS system, free base software is available for Windows, Android, and iOS. Extended functionality can be achieved via a paid update.

MICS software in detail:

  • Go/NoGo (with color coding)
  • Max/min,
  • Storage for up to 100 measured values.
  • Statistics,
  • Timer,
  • Formulas,
  • mm/inch,
  • Preset function,
  • Calibration date,
  • Lock
  • Mathematical and temperature compensation
  • Switch off
  • Brightness
  • Rotation,
  • Rechargeable Li-Po battery

Technical data:

  • Manufacturer: Microtech
  • Order number: 142305343
  • Product: Vernier caliper
  • Measuring range: 0-500
  • Resolution: 0.001 mm
  • Data output: wireless
  • with touchscreen
  • MICS system with extensive software functions
  • Accuracy: 0.025 mm
  • Measurement of pressure regulation with 8 N
  • Including calibration certificate according to ISO 17025
  • Design: digital
  • Handmade measuring jaws
  • with microcomputer and extensive software
  • Rechargeable battery
  • Length of measuring tip at the bottom: 300mm
  • Weight: 2.9 kg
  • Material: aluminium
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *