Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolutionVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolution
Item number 65-1103500258

0-25mm digital wall thickness screw, wireless, IP65, 0.1µm resolution, microcomputer, 0.00

5.070 DKK

In stock
Request a quote 65-1103500258

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Digital micrometer with 0-25mm measuring range, 0.0001mm resolution, wireless data transmission, touchscreen input, extensive software functions

This measuring instrument is particularly suitable for measuring pipe wall thickness. Accurate reading of measurement results with a resolution of 0.0001 mm. High measurement reliability with 0.002 mm accuracy. Tungsten carbide measuring faces for improved accuracy during measurement. Instead of the standard display found on bench micrometers, a microcomputer with a touchscreen is installed, through which the software functions can be accessed. The measuring tool has IP 65 protection. It is waterproof and dustproof. A handcrafted measuring tip guarantees perfect precision. The unit contains a rechargeable battery. This eliminates the need for continuous battery replacement. The micrometer is supplied including a calibration certificate according to ISO 17025.

MICS Microcomputer System – Industry 4.0 ready!!

Microtech’s groundbreaking computer-aided MICS system takes vernier calipers / in-house meters to the next level. The system is equipped with a touchscreen and extensive software functions, leaving nothing to be desired.

The display features a clearly readable touchscreen. A user-friendly menu ensures simple menu navigation. Up to 100 measured values can be stored via the internal memory. Statistics can be used to read off minimum, maximum, and average values.

The resolution with the MICS system can be up to 0.0001 mm. Color representation of GO/NoGO values. Reading of MIN/MAX values. The form mode makes it possible to enter calculation formulas with corresponding evaluation. Ambient temperatures can be incorporated into the measurement result via temperature compensation for 7 different materials. The MICS Microcomputer System allows for the input of mathematical error corrections. The display can be rotated in all directions, depending on the working direction. The calibration date can be integrated into the software; an external date search is not necessary. Wireless data transmission can be triggered via a timer, the touchscreen, or a button.

For measuring tools with the MICS system, free basic software is available for Windows, Android, and iOS. Extended functionality can be achieved via a paid update.

MICS software in detail:

  • Go/NoGo (with color coding)
  • Max/min,
  • Storage for up to 100 measured values.
  • Statistics,
  • Timer,
  • Formulas,
  • mm/inch,
  • Pre-set function,
  • Calibration date,
  • Lock
  • Mathematical and temperature compensation
  • Switch off
  • Brightness
  • Rotation,
  • Rechargeable Li-Po battery

Technical data:

  • Manufacturer: Microtech
  • Order number: 1103500258
  • Product: Micrometer holder
  • Measuring range: 0-25
  • Resolution: 0.0001 mm
  • Data output: wireless
  • with touchscreen
  • MICS system with extensive software functions
  • Accuracy: 0.002 mm
  • Protection class: IP 65
  • Including calibration certificate according to ISO 17025
  • Design: digital
  • Handmade measuring jaws
  • with microcomputer and extensive software
  • Rechargeable battery
  • is particularly suitable for: Measurement of pipe wall thicknesses
  • Measuring faces of tungsten carbide
  • Measuring inserts: ball 4.7 mm in diameter
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *