Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolutionVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolution
Item number 65-133501010

8-10mm 3-point internal micrometer with pistol grip, 0.0001 mm resolution

8.005 DKK

In stock
Request a quote 65-133501010

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

3-point internal digital micrometer with 8-10 mm measuring range, 0.0001 mm resolution, wireless data output, touchscreen input, innovative microphone functions

This measuring instrument is primarily suitable for measuring internal diameters. Accurate reading of measurement results with a resolution of 0.0001 mm. High precision with 0.003 mm accuracy. A microcomputer with a touchscreen is installed for the display of the 3-point internal micrometer, via which software functions can be accessed. The measuring tool has IP 65 protection. Waterproof and dustproof. A handcrafted measuring tip guarantees high precision. The unit uses a rechargeable battery. This eliminates the need for constant battery replacement. Delivered including a calibration certificate according to ISO 17025.

MICS Microcomputer System – Industry 4.0 Ready!!

Microtech’s groundbreaking computer-aided MICS system takes measuring tools to the next level. The system is equipped with a touchscreen and numerous software functions, leaving little to be desired.

The display features a clearly readable touchscreen. An easy-to-use menu ensures simple menu navigation. Up to 100 measured values can be stored via internal memory. Statistics can be used to read minimum, maximum, and average values.

The resolution with the MICS system can be up to 0.0001 mm. GO/NoGO values can be displayed in color. Reading of MIN/MAX values. Calculation formulas can be entered via the formula mode and then evaluated. Ambient temperatures can be incorporated into the measurement result via temperature compensation for 7 different materials. The MICS Microcomputer System allows the input of mathematical error corrections. Depending on the working direction, the display can be rotated. The calibration date can be stored in the software; an external date search is not necessary. Wireless data transmission can be triggered via a timer, the touchscreen, or a button.

Measuring tools with the MICS system are delivered with free basic software for Windows, Android, and iOS. Extended functionality can be achieved via a paid update.

MICS software in detail:

  • Go/NoGo (with color coding)
  • Max/min,
  • Storage for up to 100 measured values.
  • Statistics,
  • Timer,
  • Formulas,
  • mm/inch,
  • Pre-setting function,
  • Calibration date,
  • Lock
  • Mathematical and temperature compensation
  • Turn off
  • Brightness
  • Rotation,
  • Rechargeable Li-Po battery

Technical data:

  • Manufacturer: Microtech
  • Order number: 133501010
  • Product: 3-point inside micrometer
  • Measuring range: 8-10
  • Resolution: 0.0001 mm
  • Data output: WiFi
  • With touchscreen
  • MICS system with extensive software functions
  • Accuracy: 0.003 mm
  • Protection class: IP 65
  • Including calibration certificate according to ISO 17025
  • Design: digital
  • Handmade measuring jaws
  • With microcomputer and extensive software
  • Rechargeable battery
  • Especially suitable for: Measurement of inner diameter
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *