Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolutionVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolution
Item number 65-133502010

16-20mm 3-point internal micrometer with pistol grip, 0.0001 mm resolution

8.513 DKK

In stock
Request a quote 65-133502010

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

3-point internal micrometer digital with 16-20 mm measuring range, 0.0001 mm resolution, wireless data output, touchscreen, revolutionary software functions

This measuring instrument is particularly suitable for measuring internal diameters. Precise reading of measured values with a resolution of 0.0001 mm. High measurement reliability with 0.003 mm accuracy. Instead of a standard display, a microcomputer with a touchscreen is installed. Comprehensive software functions are available. The measuring instrument has IP 65 protection. Waterproof and dustproof. Handmade measuring jaws ensure high precision. The unit uses a rechargeable battery. This eliminates the need for constant battery replacement. The 3-point internal micrometer is delivered including a calibration certificate according to ISO 17025.

MICS Microcomputer System – Industry 4.0 ready!!

Microtech’s groundbreaking computer-aided MICS system takes measuring equipment to the next level. The system is equipped with a touchscreen and comprehensive software functions, leaving nothing to be desired.

The display is a touchscreen. An ergonomic menu ensures easy menu navigation. Up to 100 measured values can be stored via internal memory. Statistics can be used to retrieve min, max, and average values.

The resolution with the MICS system can be up to 0.0001 mm. GO/NoGO values can be displayed in color (green for GO / red for NoGO). Reading of MIN/MAX values. Calculation formulas can be entered via the formula mode and then evaluated. Ambient temperatures can be incorporated into the measurement result via temperature compensation for 7 different materials. The MICS Microcomputer System allows input of mathematical error corrections. The display can be rotated in all directions, depending on the working direction. The calibration date can be integrated into the software, so you do not always need to check the computer when a new calibration must be performed. Wireless data transfer can be triggered via a timer, touchscreen, or button.

Measuring instruments with the MICS system are delivered with free basic software for Windows, Android, and iOS. Extended functionality can be achieved via a paid update.

MICS software in detail:

  • Go/NoGo (with color coding)
  • Max/min,
  • Storage for up to 100 measured values.
  • Statistics,
  • Timer,
  • Formulas,
  • mm/inch,
  • Pre-set function,
  • Calibration date,
  • Lock
  • Mathematical and temperature compensation
  • Switch off
  • Brightness
  • Rotation,
  • Rechargeable Li-Po battery

Technical data:

  • Manufacturer: Microtech
  • Order number: 133502010
  • Product: 3-point inside micrometer
  • Measuring range: 16-20
  • Resolution: 0.0001 mm
  • Data output: Wireless
  • with touchscreen
  • MICS system with extensive software functions
  • Accuracy: 0.003 mm
  • Protection class: IP 65
  • Including calibration certificate according to ISO 17025
  • Design: digital
  • Handmade measuring jaws
  • with microcomputer and extensive software
  • Rechargeable battery
  • is particularly suitable for: Measurement of inner diameter
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *