Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolutionVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolution
Item number 65-1443060263

0-600 mm digital height gauge, wireless data output, fine adjustment, 0.001 mm resolution

8.069 DKK

In stock
Request a quote 65-1443060263

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Digital height measurement and marking with a measuring range of 0-600 mm, 0.001 mm resolution, wireless data output, touchscreen, innovative MICS features

Reliable reading of measured values with a resolution of 0.001 mm. High precision with 0.03 mm accuracy. A microcomputer with a touchscreen is installed for displaying the height measuring and marking device, via which the software functions can be accessed. Measuring force regulation at 8 N for exact measurement. The measuring force regulation ensures that the measuring force does not exceed a certain limit. This leads to more accurate, better measurement results. Handmade measuring jaws ensure precise accuracy. The unit uses a rechargeable battery. This eliminates the need for constant battery replacement. Delivered including a calibration certificate according to ISO 17025.

MICS Microcomputer System – Industry 4.0 ready!!

Microtech’s groundbreaking computer-aided MICS system takes measuring instruments to the next level. The system is equipped with a touchscreen and many software functions, leaving nothing to be desired.

The display is via a clearly readable touchscreen. An easy-to-use menu ensures simple menu navigation. The internal memory ensures that up to 100 measured values can be stored. Statistics can be used to read off min., max. and average values.

The resolution with the MICS system can be up to 0.0001 mm. GO/NoGO values can be displayed in color (green for GO / red for NoGO). Reading of MIN/MAX values. Calculation formulas can be entered via the formula mode and evaluated thereafter. Ambient temperatures can be incorporated into the measurement result via temperature compensation for 7 different materials. The MICS Microcomputer System allows input of mathematical error corrections. Depending on the working direction, the display can be rotated. The calibration date can be stored in the software; an external date search is not necessary. The wireless data transfer can be triggered via a timer, touchscreen, or button.

Measuring instruments with the MICS system are delivered with free basic software for Windows, Android, and iOS. Extended functionality can be achieved via a paid update.

MICS software in detail:

  • Go/NoGo (with color coding)
  • Max/min,
  • Storage for up to 100 measured values.
  • Statistics,
  • Timer,
  • Formulas,
  • mm/inch,
  • Pre-set function,
  • Calibration date,
  • Lock
  • Mathematical and temperature compensation
  • Switch off
  • Brightness
  • Rotation,
  • Rechargeable Li-Po battery

Technical data:

  • Manufacturer: Microtech
  • Order number: 1443060263
  • Product: Height measuring and marking device
  • Measuring range: 0-600
  • Resolution: 0.001 mm
  • Data output: WiFi
  • with touchscreen
  • MICS system with extensive software functions
  • Accuracy: 0.03 mm
  • Measurement of pressure regulation with 8 N
  • Including calibration certificate according to ISO 17025
  • Design: digital
  • Handmade measuring jaws
  • with microcomputer and extensive software
  • Rechargeable battery
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *