Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolutionVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolution
Item number 65-1443030261

0-300mm height measurement and marking unit digital, wireless data output, measurement force control, 0.001mm Aufl

4.670 DKK

In stock
Request a quote 65-1443030261

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

Digital height gauge and marking unit with 0-300mm measuring range, 0.001mm resolution, wireless data transmission, touchscreen input, comprehensive program functions

Accurate reading of measurement results with a resolution of 0.001 mm. High measurement reliability with 0.02 mm accuracy. Instead of the standard display for height gauges and marking machines, a microcomputer with a touchscreen is installed, through which the software functions can be utilized. The unit features a measuring force regulation of 12 N. The measuring force regulation ensures that the measuring force does not exceed a certain strength. This leads to more accurate, better measurement results. Handmade measuring jaws ensure good precision. The unit uses a rechargeable battery. This eliminates the need for frequent battery replacement. Delivery includes a calibration certificate according to ISO 17025.

MICS Microcomputer System – Industry 4.0 ready!!

Microtech’s groundbreaking computer-aided MICS system takes vernier calipers / inside micrometers to the next level. The system is equipped with a touchscreen and many software functions, leaving no room for alternatives.

The display is via a touchscreen. An ergonomic menu ensures easy menu navigation. Up to 100 measured values can be stored via the internal memory. Statistics can be used to read off min., max. and average values.

The resolution with the MICS system can be up to 0.0001 mm. GO/NoGO values can be displayed in color. Reading of MIN/MAX values. The form mode makes it possible to enter calculation formulas with corresponding evaluation. Ambient temperatures can be incorporated into the measurement result via temperature compensation for 7 different materials. Mathematical error corrections can be incorporated easily and quickly. The display can be rotated in all directions, depending on the working direction. The calibration date can be integrated into the software; an external date search is not necessary. The wireless data transmission can be triggered via a timer, touchscreen, or button.

Free base software for Windows, Android, and iOS is available for measuring tools with the MICS system. Extended functionality can be achieved via a paid update.

MICS software in detail:

  • Go/NoGo (with color coding)
  • Max/min,
  • Storage for up to 100 measured values.
  • Statistics,
  • Timer,
  • Formulas,
  • mm/inch,
  • Preset function,
  • Calibration date,
  • Lock
  • Mathematical and temperature compensation
  • Switch off
  • Brightness
  • Rotation,
  • Rechargeable Li-Po battery

Technical data:

  • Manufacturer: Microtech
  • Order number: 1443030261
  • Product: Height measuring and marking device
  • Measuring range: 0-300
  • Resolution: 0.001 mm
  • Data output: Wireless
  • with touchscreen
  • MICS system with extensive software functions
  • Accuracy: 0.02 mm
  • Measurement of pressure regulation with 12 N
  • Including calibration certificate according to ISO 17025
  • Design: digital
  • Handmade measuring jaws
  • with microcomputer and extensive software
  • Rechargeable battery
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *