Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%The Caliper That Doesn’t Lose Its Zero Point When Coolant Hits ItThree Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a second
Item number 17-825902

ETI Manometer Model 9202, Pressure Gauge for Measuring Positive and Negative Differential Pressure, Max & Min. Measuring Range ±137.9 mbar

803 DKK

In stock

9202 Manometer for differential pressure indication 

Robust waterproof case offering IP65 protection
High accuracy, performance, and repeatability
Zero function
11 selectable units of measurement
Automatic temperature compensation
Max/Min and average readings can be recorded

Request a quote 17-825902

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Other models in the series 5

Description

The new 9202 digital manometer enables the user to measure positive and negative differential pressure over the range of -137.9 to 137.9 mbar with a resolution of 0.1 mbar and features overpressure protection to at least twice the measuring capacity.
These easy-to-use manometers are ideal for plumbers and gas engineers to measure domestic gas pressures and low-pressure, non-corrosive air or gases in HVAC applications. The units can be used to measure air pressure in duct systems or pressure drops across filters to determine performance.
The 9202 manometer features a custom LCD display with P1, P2, diff, hold, open circuit, low battery indication, and a user-selectable backlight. The unit incorporates an auto-power off facility that automatically turns the instrument off after approximately 25 minutes, maximizing battery life. The 9202 pressure meter automatically compensates for temperature changes.
Maximum, minimum, and average measurements can be recorded by pressing the record button.
Each unit is housed in a durable ABS case that incorporates an integrated rubber seal to ensure complete water resistance and help reduce the risk of damage in harsh environments. Supplied complete with batteries, user manual, and two 500 mm long x 6 mm ID connection hoses.
To add recommended probes and other accessories, make your selections from the “Add accessories” drop-down menu and then click the “Buy now!” button.
Optional accessories: protective black silicone boot c/w foot stand and magnet for mounting on pipes, metallic surfaces (17-830258). Stainless steel wall bracket – screws not included (17-832015)

Specifications

Range and resolution – PSI: range: ±2, resolution: 0.01
Range and resolution – I H2O: range: ±55.36, resolution: 0.01
Range and resolution – mbar: range: ±137.9, resolution: 0.1
Range and resolution – kPa: range: ±13.79, resolution: 0.01
Range and resolution – inHg: range: ±4.07, resolution: 0.001
Range and resolution – mmHg: range: ±103.4, resolution: 0.1
Range and resolution – ozin2: range: ±32.00, resolution: 0.01
Range and resolution – ftH2O: range: ±4.613, resolution: 0.001
Max/Min: Yes
Range and resolution – cmH2O: range: ±140.6, resolution: 0.1
Range and resolution – kgcm2: range: ±0.1406, resolution: 0.001
Range and resolution – bar: range: ±0.1379, resolution: 0.001
Accuracy: ±0.5%FS or better (25 °C)
Repeatability: ±0.2% (max 0.5%FS)
Battery: 3 x 1.5 V AAA
Battery life: 100 hours
Dimensions: 32 x 71 x 141 mm
Weight: 185 grams
Additional information
Product Type

Manometer

Tilbehør Beskyttelse & Opbevaring

17-830258,17-832015

Tilbehør Andet

17-825998,17-890280

Trådløs

Nej

PDF (2)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *

Tilbehør Beskyttelse & Opbevaring

ETI Waterproof Black Silicone Cover with Magnetic Mount, Fits Thermometers in the ETI Therma® Series
17-830258
141 DKK
Lägg i varukorgen
ETI Wall Mount in Stainless Steel, Compatible with Therma Waterproof® Series
17-832015
187 DKK
Lägg i varukorgen

Tilbehør Andet

ETI Manometer Hoses for Pressure Gauges Models 9202 and 9205
17-825998
54 DKK
Lägg i varukorgen
ETI Calibration Certificate UKAS, 3 points, purchased at the time of ordering a pressure gauge
17-890280
703 DKK
Lägg i varukorgen