Hoppa till innehåll
Gratis fragt over 3.000 kr. ekskl. moms! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolutionVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three Seconds Instead of Twenty: How a Fast Probe Thermometer Changes Self-Monitoring in the KitchenWhen the caliper itself shows go or no-go, sampling inspection becomes faster and more consistentHow much do your thermometers actually deviate? Find out with ±0.03 °CThe temperature failed at three in the morning: How to spot it while there is still time to actThe surface doesn’t always tell you what’s happening inside: two temperature measurements in one handleThe Surface Doesn’t Tell the Whole Story: Get Both Non-Contact and Contact Measurement in One InstrumentHow to Check Your K-Type Thermometer in a Few Minutes Without an Ice Bath or Reference FurnaceThe caliper read five hundredths of a millimetre too high for three weeks, and nobody noticedWhen it’s the tolerance, not the number, that counts: how to read serial parts in a secondWhen the spirit level says flat, but the machine still runs crooked: angle measurement with 0.05° resolution
Item number 82-EK-150

Cross Table (Positioning Table) for Kitozoom, EK-150

13.766 DKK

In stock
Request a quote 82-EK-150

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Gratis fragt over 3.000 kr. ekskl. moms
  • Hand-held and bench measuring equipment from Mahr

Category:

Description

82-EK-150 Video Microscope > Video Microscope Accessories

The EK-150 is a 150×150 mm precision cross-slide stage, equipped with high-precision cross roller bearings. Adjustment is performed via the side knurled screws in the X and Y axes. Additionally, the EK-150 allows for rapid adjustment. Mounting is achieved using L-shaped support rails. The EK-150 is supplied with a glass or metal insert plate, depending on your needs. NOTE: When using this model, a height adjustment of approximately 80 mm will remain in conjunction with the 0.5x accessory lens, caused by the large working distance of 170 mm. With the glass insert plate, this can be used on the KITO 20 model.

Specification

82-EK-150 Video Microscope > Video Microscope Accessories

The EK-150 is a 150×150 mm precision cross-slide stage, equipped with high-precision cross roller bearings. Adjustment is performed via the side knurled screws in the X and Y axes. Additionally, the EK-150 allows for rapid adjustment. Mounting is achieved using L-shaped support rails. The EK-150 is supplied with a glass or metal insert plate, depending on your needs. NOTE: When using this model, a height adjustment of approximately 80 mm will remain in conjunction with the 0.5x accessory lens, caused by the large working distance of 170 mm. With the glass insert plate, this can be used on the KITO 20 model.

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *