Set met draadmeters 4,000 mm / meetvlak 6,35 mm
€ 629,76
Een hoogwaardige meettradsset met een diameter van 4,000 mm en een aanlegvlak van 6,35 mm. Perfect voor precisie bij industriële metingen. De gereedschappen zijn ontworpen voor langdurig gebruik en nauwkeurige resultaten bij technische metingen. Ideaal voor werkplaatsen en de fabricage-industrie.
Volumekorting: 5 st: 2% · 10 st: 3% · 25 st: 5%
- Gratis fragt over 3.000 kr. ekskl. moms
- Handmeetgereedschap en tafelmeetapparatuur van Mahr
Categorie: Draadmeetstiften
Beschrijving
Thread measuring wire ø6.35 mm is a precision-ground tool steel wire used in the three-wire method to verify the pitch diameter of screw threads. The three-wire method provides a more accurate pitch diameter than direct reading with a thread micrometer — three wires of identical diameter (maintained as a matched set in the inspection laboratory) provide a measurement geometry that cancels first-order errors.
Wire diameter ø6.35 mm. Lapped to tight tolerance, hardened, supplied with documented diameter calibration. Use a matching thread micrometer or universal micrometer for the actual measurement step.
Usage: select three wires of diameter matched to the thread pitch (the manufacturer’s table provides the correct wire diameter for a specific thread pitch). Place two wires in adjacent grooves on one side of the thread, one on the opposite side. Measure over the wires with a standard external micrometer. Apply the three-wire formula: pitch diameter = M − 3w + 0.866p (where M is the over-wire reading, w is the wire diameter, p is the thread pitch).
Common applications: thread QC inspection in machine shops performing screw machining, calibration lab thread form verification, line-side QC on thread cutting operations, and all applications where direct thread micrometer readings need to be verified against the more accurate three-wire reference.
Eigenschappen
- Thread measuring wire ø6.35 mm
- Hardened, ground reference surfaces for repeatable measurement
- Schut build quality
- Suitable for workshop QC, calibration lab and bench measurement applications
- SWISS MADE series
Specificaties
| Fabrikant | Schut |
|---|---|
| Serie | SWISS MADE |
| Type | Thread measuring wires |
| Artikelnummer | 64-837501 |
Compatibele accessoires
Compatibele accessoires: Schut instelstandaarden en referentiestandaarden voor periodieke verificatie van nauwkeurigheid bij bekende afmetingen; kalibratiecertificaat (ISO 17025) bij eerste levering en periodieke verificatie — typisch 12-maanden interval voor productievloer, 6-maanden voor hoog-volumeketens; Schut beschermhoesjes en bankopslag; Schut reserveonderdelen en verbruiksmaterialen waar van toepassing.
Extra informatie
| Gewicht | 0,038 kg |
|---|---|
| Draaddiameter | ø6,35 mm |
| Draaddiameter D1 mm | 4,00 |
| Metrische spoed mm | – |
| Whitworth gangen per inch | – |
| UN UNC UNF draden per inch | 2,5 |
| Varianten | 64-833442,64-833443,64-833444,64-833445,64-833446,64-833447,64-833448,64-833449,64-833450,64-833451,64-833452,64-833453,64-833454,64-833455,64-833456,64-833457,64-833458,64-833459,64-837501 |
| Varianteigenschappen | draaddiameter_d1_mm,metrische_spoed_mm,whitworth_gangen_per_inch,un_unc_unf_gangen_per_inch |
Specificatie
Thread measuring wire ø6.35 mm is a precision-ground tool steel wire used in the three-wire method to verify the pitch diameter of screw threads. The three-wire method provides a more accurate pitch diameter than direct reading with a thread micrometer — three wires of identical diameter (maintained as a matched set in the inspection laboratory) provide a measurement geometry that cancels first-order errors.
Wire diameter ø6.35 mm. Lapped to tight tolerance, hardened, supplied with documented diameter calibration. Use a matching thread micrometer or universal micrometer for the actual measurement step.
Usage: select three wires of diameter matched to the thread pitch (the manufacturer’s table provides the correct wire diameter for a specific thread pitch). Place two wires in adjacent grooves on one side of the thread, one on the opposite side. Measure over the wires with a standard external micrometer. Apply the three-wire formula: pitch diameter = M − 3w + 0.866p (where M is the over-wire reading, w is the wire diameter, p is the thread pitch).
Common applications: thread QC inspection in machine shops performing screw machining, calibration lab thread form verification, line-side QC on thread cutting operations, and all applications where direct thread micrometer readings need to be verified against the more accurate three-wire reference.
Eigenschappen
- Thread measuring wire ø6.35 mm
- Hardened, ground reference surfaces for repeatable measurement
- Schut build quality
- Suitable for workshop QC, calibration lab and bench measurement applications
- SWISS MADE series
Specificaties
| Fabrikant | Schut |
|---|---|
| Serie | SWISS MADE |
| Type | Thread measuring wires |
| Artikelnummer | 64-837501 |
Compatibele accessoires
Compatibele accessoires: Schut instelstandaarden en referentiestandaarden voor periodieke verificatie van nauwkeurigheid bij bekende afmetingen; kalibratiecertificaat (ISO 17025) bij eerste levering en periodieke verificatie — typisch 12-maanden interval voor productievloer, 6-maanden voor hoog-volumeketens; Schut beschermhoesjes en bankopslag; Schut reserveonderdelen en verbruiksmaterialen waar van toepassing.
Beoordelingen (0)
Wees de eerste om te beoordelen Cancel reply
Gerelateerde producten
-
-
-
-
64-781652Draadparen voor draadmeting, micrometers met meetvlak Ø6,5 mm, draaddiameter 0,390 mm, UN/UNC/UNF 40 draadprofielen per inch
€ 201,72Op voorraad



Er zijn nog geen beoordelingen.